Electricians help please.

It sounds like you are trying to power a fan that runs on 220V AC with 12 V DC - It ain't goin to turn!
If you don't know what you are doing, do not meddle or you could hurt yourself or others around you.
Get a fan that runs on 12 volts DC & drive it from the 12V DC power supply (appropriately fused of course).

Ian
 
You could use the 240v one with a light type dimmer switch as well.
That would allow you to control the ventilation speed/amount.

Note...make sure the plug you fit has a 3a fuse fitted as that's all you need.
As above mentioned, if you're not sure on anything get a pal to help/check it out.
Atb
 
Back
Top