CZ 452 - scope mount question

JockStalk

Well-Known Member
Proud new owner of a CZ 452 Style - the Bushnell 3-9x50 scope that came with it is fine, but the current scope mount gets in the way of the ejected cartridge.
Any recommendations on manufacturer etc?

IMG_6215.jpg
 
Last edited:
I cant tell quite what's happening there, it looks like low rings on a separate mount. Can you just remove the 1 piece and use the rings? They may be a bit low for that scope In any case you just need some individual rings.
 
Gaothead that is I believe a one piece mount the rings do not remove.Unless it converts from 3/8 to 11mm with rings fitted on top
Jockstalk just have a look at Sportsmatch mounts on the Bay of E they are good and will not interfere with ejection
 
The mount looks good but I'm sure it isn't worth too much, so I would attack it with a file/grinder and remove enough material to allow ejection.
 
Eigher a new pair of sportsmatch mounts

or

take of the one piece and cut / machine the side out where it ejects
 
Thanks folks - hadnt thought of cutting the base out to clear it :doh:

Was unpacking the stihl saw when as if by magic some sportsmatch mounts appeared on SD.

Happy days.

:thumb:
 
Last edited:
Back
Top