Henry Big Boy 38/357 Magnum Under-lever and reloading Gear
The Henry is in good condition I've had it about 10 months, it had a full service and was drilled to take a 2nd gen scope rail at Viking arms just before i purchased it second-hand ( the parts that were replaced are in the pictures firing pin and other bits ). Its the 1 st gen one. Theirs a couple of small scratches on the stock and the bluing is in good condition. I replace the marble sight with a hi viz on that cost me £50 the original sight is included as well. every body who sees it comments how good it looks.
1 set of RBCS 10-10 scales just replaced the parts that the blades fit into. The flap on the Pan snap off and its had a needle glued on the point to make it easier to see.
1 set of My weigh i101 scales these are very accurate.
1 lee hand primer
About 450 cases reloaded about twice ( about 150 have been primed )
4x100 MCM case guard cases
4x50 MCM case guard cases
1 bottle of bullseye smokeless pistol powder about a 3rd full.
set of 38/357 die set
1 Lee Precision Classic Turret Press. this has been welded near one of the holes but works very well.
1 large loop ( for use when wearing gloves )
1 Picatinny Scope Base.
1 brass jag
1 patch jag thing
I may have a few more bits I will check
Looking for £800 ono
Sorry but collection only
Thanks for looking
Need any more pictures just let me know
Their is 80 factory rounds as well