So last weekend was quarterly rifle cleaning and zero-check + 5 shot re-fouling session for my .243. This time I decided to simplify my life and use only the PH009 for cleaning the bore. Wetted a patch and ran through, no sign of copper. Dipped the bronze brush and ran through barrel 6 times. patched out to remove deposits, then re-wetted a patch with PH009 and patched out till dry again.
checked Zero whilst re-fouling with 5 shots. Interestingly the S&B in Warne mounts needed 3 clicks up and one left from 100yds, putting the last 3 rounds through the same hole.
Job done for another 3 months - siiiiimples
checked Zero whilst re-fouling with 5 shots. Interestingly the S&B in Warne mounts needed 3 clicks up and one left from 100yds, putting the last 3 rounds through the same hole.
Job done for another 3 months - siiiiimples