Load data for sauer 243 outback

miffy

Well-Known Member
Hi all

Can anybody help with some load data for a sauer outback in 243, :doh:
Just trying to save a little time.
Cheers

Miffy
 
What bullet weight do you want to shoot?
Usually most .243 Win. prefer bullets not greater than 100gn. I found Nosler 95gn BT worked best in my rifle.
I used 44.5gn Vit N160 & Rem 9 1/2 primers with them. Work up slowly, but you could get 1/8" MOA at 100 yards with this load. Remington cases were just fine & I'd neck size, only full length sizing them once from new. Trim twice then throw them away. :old:
 
many Thanks Deeangeo

Will give them a try, i have been using Sierra 80gr sbt with cci benchrest primers and 39.5 gr IMR 4895.
And Hornady 58 gr v-max same primer and 42 gr of Accurate 2460 with federal brass.
Cheers

Miffy
 
my .243 is a sako 1:10 RH twist in 20" sporter barrel.

I shoot 87g hornady HPBT pushed by 35.5g Varget at 2.7000" COAL in Norma brass with CCI BR LR2 primers. This load in a bench rest and read bag will almost one-hole. I am sure if I try enough, I will eventually put 3 or 5 rounds almost literally through the same hole. It also helps that my factory Sako shoots like a £3k custom sniper-job:D
 
Back
Top