Hoppes elite copper terminator

charlieboy-shooter

Well-Known Member
Hi,

Possibly a bit late to ask the question as I have already bought it. But can anyone give me there views on 'Hoppes elite copper terminator'. So far only ever cleaned bore with a bore snake or bronze brush with at most as bit of Napier sprayed on it. Just started to reload and was advised that I should give the bore a real good clean hence the purchase. Views very much appreciated.

​Thanks
 
its not the most aggressive copper cleaner that's for sure, I patch my bore out with a "wet" cleaner like hoppes 9 first i'll put 3 wet patches though and scrub with a bronze brush about 20/30 passes after the last patch that deals with the carbon and powder fouling and removes some copper, patch dry, then a patch of "wipe out" brush with a nylon brush till it foams leave for an hour then patch dry, repeat the wipe out if necessary
 
Back
Top