woodmaster
Well-Known Member
Hi. I recently had my rifle cut down to 18", to make it lighter, more agile and not catch in the trees while stalking. I have not had it all that long so never really found the ultimate recipe. I would like to find out what loads are reccomended for the following bullets which I already have.
They are:
Hornady interlock 150gr SP #3031
Nosler BT 168gr #30168
Speer 150gr BTSP #2022
all in .308 win.
I have VHIT N140, but would change powder if better results likely from others like varget or h4891.
I have cci 200 large rifle primers.
Lapua brass and federal brass.
As I now have a cmm4 mod on this rifle I don't really want to be chucking large quantity of lead around to find a reasonable load.
I am looking at shooting out to 200 yds, ideally with a MV of 2400 fps or higher if poss.
Now hopefully quick load could provide a result that gives a 100% powder burn so no muzzle flash is produced, barrel stays cleaner.
If there is anyone with quick load who would run this data for me I would be most grateful. Or if anyone using a similar set up who has consistent and accurate loads I like to have a base to start from.
If any other info required I should be able to provide it.
I realise this programme is not cheap else I'd buy it myself, but once a load is found I'm not likely to change from it. However happy to make a contribution to helpers or a charity or something. Just the powder and lead saved will be worth it.
Thanks.
They are:
Hornady interlock 150gr SP #3031
Nosler BT 168gr #30168
Speer 150gr BTSP #2022
all in .308 win.
I have VHIT N140, but would change powder if better results likely from others like varget or h4891.
I have cci 200 large rifle primers.
Lapua brass and federal brass.
As I now have a cmm4 mod on this rifle I don't really want to be chucking large quantity of lead around to find a reasonable load.
I am looking at shooting out to 200 yds, ideally with a MV of 2400 fps or higher if poss.
Now hopefully quick load could provide a result that gives a 100% powder burn so no muzzle flash is produced, barrel stays cleaner.
If there is anyone with quick load who would run this data for me I would be most grateful. Or if anyone using a similar set up who has consistent and accurate loads I like to have a base to start from.
If any other info required I should be able to provide it.
I realise this programme is not cheap else I'd buy it myself, but once a load is found I'm not likely to change from it. However happy to make a contribution to helpers or a charity or something. Just the powder and lead saved will be worth it.
Thanks.