Brand new wireless GSM alarm system. Bought with intention to install in rented accommodation, but work commitments require relocation so no longer needed - £120 ono
What you get is:
2 x Keypad/Control Unit
3 x Door/Window Sensor
3 x Motion Detector
4 x Remote Control
1 x Wired Siren
1 x Power Adapter
1 x English Manual
insert a sim card and it will text you and alert you to any alarms.
Touch Keypad GSM & PSTN Voice Home Security Alarm
Global Use (850/900/1800/1900mhz)
Defence zone:99 wireless defence zones
Touch Keypad TFT Color Display 99 Wireless GSM/PSTN home Voice alarm Security System with built-in speaker for intercom Security
• TFT color display, humanized menu, voice prompt and easy to use.
•6 groups preset telephone number for alert calling; not lost number without power
• Up to 99 wireless zones, each wireless zones can be defined as one of the 8 zone types, each zone can setup the siren independently.
•Four sets of scheduled arm/disarmed function, each timed arm/disarm you can select the period of time and different defense zone
• Support ISD automatic voice mailbox for playback message upon alert. Maximum length of voice message is 10 seconds.
•Remote control for arming, disarming, monitoring and speaking, setting up for relay and siren.
•Wireless intelligent study coding, compatible with PT2262 normal encoding and 1527 encoding, Maximum support 150 remote control and 150 sensors.
•Integrated clock chip,time will not lose without power
•Unique black box feature, display most recent 72 disarmed records and 102 recent alarm recording with accurate alarm time and zones.
•Compatible with the international alarm networking protocol CONTACT ID
•7 inch TFT color display, touch screen keypad, built-in high performance CPU, this high-end dual-network GSM/PSTN alarm system has reliable performance and favourable operability.
•It connects with wireless infrared detector, door sensor, smoke detector, gas detector, emergency button and other accessories. When the detector is trigger, the alarm system will notify the user by 120 decibels alarm sound and at the same time a call and SMS message will be sent to the user.
•It is a choice of stability, reliability, security, and user friendliness security product.
•Features are very practical, cost-effective, completed configuration and ease of use.
Alarm keypad/Control Unit (GSM/PSTN alarm with Power Adapter):
insert the power adapter output of electricity host power supply hole at this point, the host voice prompt welcome to use intelligent voice alarm, the backup battery switch to [ON]At first, Connect the telephone line to the perimeter phone interface of the host, and connect telephone to the inside phone interface. Secondly, connect the siren to the siren interface, and plug in adapter. At last, the host will voice prompt “welcome to use alarm system”, then it’s done after switch the power switch to “ON”.
1, Dial Mode: GSM/PSTN
2, GSM frequency: 850/900/1800/1900Mhz
3, Input Voltage: 9V-12V DC
4, Backup battery: NI-HI AAA*6 DC7.2V
5, Alarm loudness: 110dB
6, Wireless frequency is 433MHz
PIR Motion Infrared Detector( Battery Included ):
Installation height is about 2.2 meters above ground and the optimized detection angle for most motion sensor is 90 degree. The sensor should face the detected area with this consideration for best coverage. It is advised to install with the face of motion sensor perpendicular to the most probable moving detection of people for the highest effective detection.Before use, make sure the power switch of PIR motion sensors is at the ON position.
1, Frequency: 433Mhz
2, Built-in antenna
3, Detection distance: 10-12 meters
4, Detection range: 110 degree
5, Operating power: 9V
Door / Windor Sensor( Battery Included):
Use the random equipped double-side tape to stick a magnetic stripe on the door and affix the gate magnetic emission box on the doorframe. Pay attention to put the magnetic strip close to the side with indicator lights of the emission box during installation, assuring proper alignment and the smaller distance the better.
1, Transmission frequency: 433MHz
2, Operating Power: 23A 12V
3, Built-in Antenna
4, It will send the alarm signal to control host once the door or window is opened
Remote Control ( Battery Included):
When an emergency occurs, press emergency button on the remote control or on panel to activate alarm.
1, Power: 12V battery x 1 pcs(battery included)
2, Static Current: I1 = 0
3, Transmission Current: I2 no more than 15mA
4, Transmission Time: no less than 1s
5, Transmission Distance: 80m (No Obstacle)
6, Operational temperature:-10 to 40 (approx 14F - 104F)
7, Humidity: no more than 90
2, Wired connect to Host
3, Operation Temp: -10C~50C;Humidity:no more than 90%
Attachment 47702Attachment 47703Attachment 47705Attachment 47706