MDT Fieldstock 3D printed bolt aperture filler

The No1 App in Europe for Hunting Area Management - MyHunt
W

wharpy

Member
Hi all

I've recently bought an MDT Fieldstock for my Tikka T3x.

The actions fits fine but the trigger mech is exposed. I've reached out to MDT who advise this is normal and wont effect my rifle. They advise that some people 3D print a filler, they don't have any further info on printer files to do it. I do hill and forest stalking and ain't keen on having the mechanism exposed.

Has anybody 3D printed a filler for their MDT stock and have a file that they'd be prepared to share?

Thanks Keithcontent.webp
 
Reading the blurb about it, and comparing pictures, leads me to believe this is not quite the right dimensions for a Tikka T3. However, all is not lost. If you send me the precise measurements of your hole (ooh err!) then I can tweak the design to fit as best I can. I'm sure we can get something going!

@3595wilk is yours a T3 also?
 
JimmySticks said:
Reading the blurb about it, and comparing pictures, leads me to believe this is not quite the right dimensions for a Tikka T3. However, all is not lost. If you send me the precise measurements of your hole (ooh err!) then I can tweak the design to fit as best I can. I'm sure we can get something going!

@3595wilk is yours a T3 also?
Click to expand...
It is indeed........and thank you!

I'll drop you a PM in a bit to discuss👍
 
JimmySticks said:
Reading the blurb about it, and comparing pictures, leads me to believe this is not quite the right dimensions for a Tikka T3. However, all is not lost. If you send me the precise measurements of your hole (ooh err!) then I can tweak the design to fit as best I can. I'm sure we can get something going!

@3595wilk is yours a T3 also?
Click to expand...
Hi Jimmy f possible .
Please can I buy one. In black orange or grey for a mdt field stock for a t3
 
Looks like there's a need here!!

@pendle once I get the size adjusted properly I'll let you know.

If anyone is near the North West / Merseyside/ North Wales area, or near Exeter (this weekend only) and has one I can measure up myself that would ace!
 
Right folks, we are done!!

Thanks for your patience with this, had a few issues with printer updates and needing a new heating element, but it's done, tested, and ready to go!

Huge thanks to @pendle for coming to me twice for fitting and testing sessions. Couldn't have done it without you mate.

Those of you who have requested one so far if you PM you address and just cover the postage, you can be my testing team 😄
@wharpy @3595wilk, @Bo Diddley

1000051483.webp
1000051482.webp
1000051481.webp

1000051147.webp


Thanks all,

Jim
 

Attachments

  • 1000051481.webp
    1000051481.webp
    148.2 KB · Views: 6
I got a challenge for you if you are up for it. I have an MDT Oryx Chassis for my T1X but I have converted it (cut an aperture out!) to fit my LEFT-HANDED T1X Action.

CAn you make a blank to fill in the OEM MDT aperture on the RHS of the Chassis so as to "clean up" the appearance?

1779200285864.webp

Russell
 
You must log in or register to reply here.
Browning X Bolt 2 Cashback
Back
Top