Sold: 7×64mm Brenneke reloading items

Status
Not open for further replies.

RoeHunter

Well-Known Member
#1
SORRY - WITHDRAWN FOR SALE

Having recently sold my 7x64 barrel I now have the following items for sale either individually as priced or as a job lot at (was £160) now reduced to £100 plus postage


All the following cases have been made ready for reloading i.e. they just need priming before receiving powder charge and then bullet seating.


150 off RWS Cases not fired since neck annealing £75


106 off RWS Cases Once Fired from New or Neck annealing. £50


39 off Winchester Cases not fired since neck annealing. £20


3 off RWS Cartridge Boxes (no cases). Free


2 off Winchester Cartridge Boxes (no cases). Free


Set of Lee Pacesetter Dies (three) Full Length Case Sizing (please note the de-priming pin end has been removed), Bullet Seating Die, and Factory Crimp. £25


Lee Quick Trim Overall Length Die. £20


Regards RoeHunter
 

Attachments

Last edited:
#5
Set of Lee Pacesetter Dies (three) Full Length Case Sizing (please note the de-priming pin end has been removed), Bullet Seating Die, and Factory Crimp. £25
Hello RoeHunter. When you say the de-priming pin end has been removed, you mean it's broken? So can't be used for removing primers basically.
 

RoeHunter

Well-Known Member
#6
Hello RoeHunter. When you say the de-priming pin end has been removed, you mean it's broken? So can't be used for removing primers basically.
Yes that is correct, I accidentally bent it so I removed it. I use the Redding Small Decapping Die for all my depriming. So if someone wanted to use the Lee Full Length Case Sizing die to remove primers, then they would need to buy a new Lee Easy X Expander (Decapper) SE2317.

Please see photo

2018-09-11 18.18.58.jpg
 

RoeHunter

Well-Known Member
#8
Could you post a picture of the QuickTrim please? Interested in the dies too if willing to split?
Scrumbag, sorry for the delay in replying to your post above, for some reason I am not receiving any notifications of people's postings on this thread. As requested I attach a photo of Lee Quick Trim Overall Length Die (first photo) which is just the length die and not a completer Quick Trim set up.

Yes I am happy to sell just the three Lee Pacesetter Dies on there own, but would much prefer for the buyer to purchase the Quick Trim Length Die as well.

If it is of any help, I do have a spare Lee Precision Deluxe Quick Trim Case Trimmer (90437) (second photo) which is surplus to my requirements but haven't yet thought how much I want for it.

2018-09-12 15.42.34.jpg
2018-09-12 15.43.32.jpg
 

RoeHunter

Well-Known Member
#10
Sorry Norfolk Shooter, I have been very busy recently and not had time to check this thread for new posts. I have now withdrawn these items from sale, sorry. Regards RoeHunter
 
Status
Not open for further replies.

Top