Recent content by danblack1

Mates 6.5 punches one hole groups again using heavy bullets.

have 308 had trouble sighting in then discovered stock screws needed torqued (straight out of box ) Mary jane (all my rifles have pet names ) likes Sako 165 gr or hand loads 43 grns reloader pushing 165 grn fmj gives cloverleaf at 100 m, this is a fairly hefty load so start at 41 grns and work...

sounds the job unfortunately each Chief Constable seems to have their own criteria, here FAE (explosives ) have full authority and ALL CIVIL ranges must pass THEIR approval, at the moment they even dictate to Dealers what where and when they can store ammunition and volume and are pressing to...

Small bore range construction regulations differ from full bore and under latest regulations local Police Authority MUST ISSUE end User Authority.. BASC or Scottish Association are the best fielders as they can help argue the toss'

BASC can give a lot of assistance.

google HOME OFFICE DIRECTIONS FOR RANGES AND REGULATIONS Also your Local Firearms Officer can advise, for Full Bore you must have a No danger back ground "of 2000 meters. your height of backstop is ^6 mil @ 100 meters your arch left and right if I recall is 4mil, the number of fp,s is your arch...

ici had duff .17hmr ammo check ALL CASES (fired ) for splits if you find any isolate batch; the distributors have been aware of the issue for ages; Winchester cases seem to have thicker walls .