Recent content by gregjph

Decent length concrete screwbolts will be more than adequate if you don't want to deal with resin. Bonus is that you can simply unscrew them from the wall if you ever wanted to move the cabinet, rather than having to cut off rawlbolts after unmounting the cabinet.

With a 6x2 running from back of table to front, I've marked it out and the outer two bolt holes end up fairly close to the edges of the board. Enough that the edge of the bolt heads would likely touch the outer edges of the board. Is it worth rotating the board 90 degrees and using it width...

Clamping looks like the way to go for now then and I'll look into getting a portable bench long term for ease of storage. Thanks all :)

Thanks for the advice. If I clamp it front and back, is it worth me clamping another piece of wood to the underside of the table, sandwiching the table between the press piece and the underside piece?

It's the classic turret, so the linkage is the same as the classic cast and the base is cast with steel everywhere else. Hopefully not too much play, I'd heard the other Lee turret could be a little loose. I'm going to take out the indexing rod and run it as a single stage while I get to grips...

Ideal, thanks.

Table is about 2" thick, solid wood and fairly well framed out, hopefully should be enough. Might see if I can find some plate in the long run then.

Mounting the 2x6 to the b&d or would the thing be stiff enough on it's own just to mount the press directly to? Had thought about it but wasn't sure if the wm would be sturdy enough.

Hi All, Recently invested in a shiny new Lee classic turret press. Unfortunately, I don't currently have the room for a dedicated bench to mount it to directly. I do have a fairly sturdy solid wood table but am not able to drill through it for fear of the wrath of the other half. I am...

Thanks. Tamar Rangers normally, out at Parracombe

Hi Guys, Been watching the forums for advice for a while and decided it was time to join now I've got my FAC. Based in Plymouth and I mainly shoot target with an interest in historic/service rifles. I normally shoot 6.5x55 but .223 and .308 also when I get chance. Looking to maybe try...