Koenig
Reaction score
1,013

Latest activity Postings About

    • Koenig replied to the thread For Sale: BINO,S.
      I have a pair of these and they are very, very good. They are much better than the £400 price tag suggests.
    • Koenig replied to the thread GT 85 spray.
      Use it a lot for bikes and cars. It leaves a PTFE film in place. You can often get it in Aldi or Lidl (can’t recall which) for £2 a...
    • Koenig replied to the thread Neoprene scope cover.
      I put the long loop over the barrel behind the sling swivel and then loosely zip tie the cover in the centre of the mount so it sits in...
    • Koenig replied to the thread Neoprene scope cover.
      Big Ear’s covers are really good. Been using mine for 12 months or so often in vile weather.
    • Koenig replied to the thread Light weight bullet's in .308.
      I always found 125gr Noslers hand loads so so in my T3 accuracy wise. I can’t say I noticed any change in recoil. I probably wouldn’t...
    • Koenig replied to the thread What should I get in the US.
      I lived in the US for a year and was frequently in the local Bass Pro. A couple of observations: 1. Shooting/hunting in the US is an...
    • Koenig replied to the thread Gralloch how to.
      As per VSS point 2. I used to try and carefully cut the bladder out but it’s like a water filled balloon (if full) and all too easy to...
    • Do you have .308 in brown?
    • Koenig replied to the thread N135 for .308 and 150grn bullets.
      Agree with Ed, whilst a newbie to reloading I too have had good results in a 20” barrel T3 .308 with Vint 135 and a range of 150 grain...
    • Koenig replied to the thread "Stalking" watch.
      Any Casio G Shock to suit. Some are massive, others more sensible. Just don’t get DEET on the strap.
    • Koenig reacted to 308rws's post in the thread Mounts for Picatinny Rail? with Like Like.
      Any quality rings with a machined picatinny recoil lug (or 2) on the underside of the ring base will be more than adequate (and...
    • Strange decision. Whatever next...screwdrivers, powertools... the mind boggles. Knives are ubiquitous essential tools. If someone wishes...
    • Koenig replied to the thread Mounts for Picatinny Rail?.
      Agreed Rutland Lad - and thanks. I agree, even with straight to rail mounts like the DNZ you need a check zero. I always mark up my...
    • Koenig reacted to Rutland lad's post in the thread Mounts for Picatinny Rail? with Like Like.
      Either is usually good - once the rings are fixed to the scope, then it’s only the lower mounts you’re undoing every time, and it will...
    • BLUF: A plea for a steer or two from the SD collective regarding a minor technical question. I am hopefully about to buy a used rifle...
      • IMG_7266.png
  • Loading…
  • Loading…
Back
Top