FREE Blaser R8 Trigger Storage Idea........................

Lateral

Well-Known Member
I finally found a use for the stupid Blaser trigger boxes !

Work really well, just require some decent 32mm magnets, and some double sided tape.

The magnets are stuck on the inside of the box with the DS tape, just make sure to place them with space around the edges, or the trigger won't fit ! Make sure you get the STRONG magnets, and stick them the right way round 😉

Something like these, but aim for something claiming 80lb +, even though it sounds crazy strong, don't get something weaker !

I've used a "gel" type DS tape, which is removable, with a little effort, if required.

https://www.amazon.co.uk/Aenienoe-Magnets-Neodymium-Pulling-Countersunk/dp/B0DLKPH7DZ/ref=sr_1_9?crid=23384KZSH2QHP&dib=eyJ2IjoiMSJ9.sxK-wpzg6GwDRTq-a_5pUNqRkzMvgiVl2AarZjFp-DetPn9zZg2HHIYl7lnjR7dkPRVjQzpsm-R8gsEO1kY0paCNkyVxlXUi0Xt2GgPXF4hIAGFzOsvPgrNBEM1MG-9URIjJOhLxRxknXT1RVBlQVDp6SwIxP6OGo-msdTrVBxAPN2xLmhVPjOwjiBsq_XoDgTrcvtIfzbawoepZTW6OPzmikEj-OD7gj_vctlN4oBudr-lYwJEn6fO27cbWCoCTHrlWuB3iAtXp-lqlfmSuYgcgJe0w1hzYbeJqyW9w6to.an6H8ClhgLutXHUFvLFn4n25N32FENwhWk9630kp-ag&dib_tag=se&keywords=magnet+32mm&qid=1774449013&sprefix=magnet+32mm+,aps,248&sr=8-9&th=1


Mark / 07802-306444

Blaser R8 Trigger Holder.webpCabinet 1.webpTrigger Holder Mags.webp
 
Last edited:
Back
Top