Well I had hoped it wouldn’t come to this but I can’t really afford to keep this and my Vudoo.
Stupidly bought this last summer as I had a buyer for the Vudoo who then pulled out
FX Panthera .25 700mm
New last summer but think it had sat on the shelf for a while at sportsman’s as the bottle date is 2022/10 and I’ve replaced a few o-rings, it’s held 222bar since 3rd Jan now.
The extreme spread on this is usually 1-5fps with SDs of zero to two ish
Has shot less than 300 slugs although this will increase as I’ll definitely be using it.
Includes the following upgrades / extras:
- Sabre weighted and extended front rail (original not included)
- Huma regulator (reduced lock time, original included)
- Sekmet pro gauge (original included)
- MDT elite vertical grip (original included)
- 3L 300 bar bottle and long whip for tethering (fill to 230 and hook straight up, 2024/10 date)
- MDT double sided cheek piece on my dodgy 3d printed adapter (original included)
- Carm slug mag, Carm pellet mag, Carm SSL (original included)
- 30cal moderator adapter (original .25 included) as the extra bore helps accuracy
- over 700 altaros 49.5 slugs including some little 3d printed cases I made.
- 3D printed gauge cover, thumb rest, trigger, side plate and bag rider of my own design.
- majority of an o ring kit, plus a spare valve and seat plus the sub12airgunners valve removal tool
- FX hard case.
£2250 (total cost was circa £3k)
No offers thanks, I would rather keep it.
Can include:
Athlon Ares BTR 4.5-27x50 FFP mil and Burris XTR mounts
£650+
It’s capable of 100y groups like this and probably better if I am honest:
These slugs like running at 888 and I’ve found 130bar on the reg gives this with not too much hammer either. This is approx 87ft/lb and no doubt she’ll go higher
Stupidly bought this last summer as I had a buyer for the Vudoo who then pulled out
FX Panthera .25 700mm
New last summer but think it had sat on the shelf for a while at sportsman’s as the bottle date is 2022/10 and I’ve replaced a few o-rings, it’s held 222bar since 3rd Jan now.
The extreme spread on this is usually 1-5fps with SDs of zero to two ish
Has shot less than 300 slugs although this will increase as I’ll definitely be using it.
Includes the following upgrades / extras:
- Sabre weighted and extended front rail (original not included)
- Huma regulator (reduced lock time, original included)
- Sekmet pro gauge (original included)
- MDT elite vertical grip (original included)
- 3L 300 bar bottle and long whip for tethering (fill to 230 and hook straight up, 2024/10 date)
- MDT double sided cheek piece on my dodgy 3d printed adapter (original included)
- Carm slug mag, Carm pellet mag, Carm SSL (original included)
- 30cal moderator adapter (original .25 included) as the extra bore helps accuracy
- over 700 altaros 49.5 slugs including some little 3d printed cases I made.
- 3D printed gauge cover, thumb rest, trigger, side plate and bag rider of my own design.
- majority of an o ring kit, plus a spare valve and seat plus the sub12airgunners valve removal tool
- FX hard case.
£2250 (total cost was circa £3k)
No offers thanks, I would rather keep it.
Can include:
Athlon Ares BTR 4.5-27x50 FFP mil and Burris XTR mounts
£650+
It’s capable of 100y groups like this and probably better if I am honest:
These slugs like running at 888 and I’ve found 130bar on the reg gives this with not too much hammer either. This is approx 87ft/lb and no doubt she’ll go higher
