Wanted: 7mm Moderator

NorthernTikka · Jun 15, 2026

I’m looking for a 7mm moderator if anyone has one. For a PRC so magnum proof, either end of barrel or can accommodate a Proof Sendero profile.

Eric the Red · Jun 15, 2026

thread?

NorthernTikka · Saturday at 9:20 PM

Well spotted! 18x1

HonestJohn · Sunday at 9:08 AM

DPT 6.5’s handle 7mm easily as fyi in case you find one.

.243 t3 · Tuesday at 10:09 PM

HonestJohn said:
DPT 6.5’s handle 7mm easily as fyi in case you find one.

Really ??? Thought a 6.5 bore is 0.264” where the 7 prc is 0.284 “ seems abit risky

Onelesscharlie · Wednesday at 2:46 PM

Made a few to suit Bergara 7mm and 300 PRC's so would just need to re-thread to 18x1
Let me know if I can help.

Edinburgh Rifles · 2026-06-25T14:12:16+0100

.243 t3 said:
Really ??? Thought a 6.5 bore is 0.264” where the 7 prc is 0.284 “ seems abit risky

thats the bullet calibre not the bore

I ran a .22 rated DPT on a 6.5 Grendel (7mm bore)

I wouldnt run an aluminium mod on a magnum unless for example you add a stainless baffle to the DPT
The 7PRC is not a massive magnum so any decent forward mounted steel mod will do the job admirably
The 7mm is to close to the 30cal rated offerings from most makers to wory about going calibre specific

Give us a bell we have a range that will suit

I personally run a Jet-z on a 300 Norma Magnum, works a charm. Considerably more powder (20gr H2O)
Solid steel mods are significantly more resilient than ANY aluminium component based ones
you'll burn through the baffles on an aluminium ones in quick style

We have:
SL5i
SL7i
Jet-Z
PES/MAE

.243 t3 · 2026-06-25T14:45:04+0100

So you saying you could run a .30 jet z or sl5i on a 7 prc Edd ?

Wanted: 7mm Moderator

NorthernTikka

Well-Known Member

Eric the Red

Well-Known Member

NorthernTikka

Well-Known Member

HonestJohn

Well-Known Member

.243 t3

Well-Known Member

Onelesscharlie

Well-Known Member

Attachments

Edinburgh Rifles

Well-Known Member

.243 t3

Well-Known Member

Similar threads