Hello James,If you're in the market for a new barrel please get in touch. I supply the following but have access other manufacturers.
Bartlein barrel (subject to stock) £995.00
Douglas ultra rifled barrels supplied and fitted £875.00
IBI barrel (subject to stock) £900.00
Krieger barrel (subject to stock) £995.00
Pendragon Precision £900.00
Phoenix cut barrel £950.00
Proof research (subject to stock) £950.00
Shilen select match barrel £875.00
ZPV £775.00
Prices subject to change at any time, all prices include Cerakote, thread protector and instant proof, excludes fluting. I am at proof (I physically take them) once a month. Other barrels available please message us. All work carried out as per our terms. I offer an express service of 4-6 weeks (if the barrel is on the shelf) at extra cost.
There are also custom actions available (subject to stock) at cost, whatever they cost me they cost you, plus the cost of the barrel.
I have several Krueger’s but I think they’re 6.5 and 30s but I’ll check and if they are I shall make a call. The 6PPC 1-13.5 I could probably get one from Phoenix...RgdsHello James,
do you have any Krieger heavy varmint 6mm 1:8 or 1:7.5 suitable for a 6BR? Also a 6PPC similar in 1:13.5?
If not, can you let me know the approximate order time?
Thankyou,
Neil.
Checked barrel, only 6.5s so I’ll see if anything is available for you. RgdsHi James,
many thanks. I would definately want the Krieger barrels on both profiles please.
Cheers
Neil.
I have a .17 barrel blank 1-9 twist Lothar walther perfect for quad possiblyCan you get a .17 barrel? Seems to be too small for most of them to do? It’s for a Sako quad so is machined to fit as an interchangeable thing.
Pendragon hinted they were doing a run a while back, not sure if they went ahead with itI thought they only did .22 but I’ll ask.
What’s the cost to have this done .223 I have an old stub sitting
£1250 all in. RgdsWhat’s the cost to have this done .223 I have an old stub sitting
Thanks
Thanks for that sounds good£1250 all in. Rgds
A barrel is a barrel, it’s personal preference but I have several manufacturers on the shelf and can get others if required. The price above is for a Pendragon stainless. RgdsThanks for that sounds good
What barrel would you recommend and it would need to be a 18x1 thread to suit mod I have
So Same profile as original blaser match barrel
Thanks
Can you email your specs over please. RgdsHi, for my info, can you supply a Remington 700 barrel in .223 Wylde? What would the price be? Thanks
Have 1-7 twist on the shelf. RgdsHi, for my info, can you supply a Remington 700 barrel in .223 Wylde? What would the price be? Thanks