Results 1 to 8 of 8

Thread: Home made Lift

  1. #1

    Home made Lift

    With some new stalking land in North Essex secured and a few big boys in that area I decided to re-use a jib made for lifting a job I did from time to time on site which worked of my welding trailer..

    I made the rear bumper as the standard ones are crap, 90x90x8mm box... the jib slides over the end of the box.
    All you need is the deer off the ground and then swing it on the tail-gate...



    Tim.243
    Stalking is very much like going to the night club

    You can always tell an Essex Boy, just you cant tell him much...

    An hour in the field is worth a week of typing trash.....




  2. #2

  3. #3
    How's it fitted to the bumper ? looks like its now over wide pass your arches and the police may give you a tug from that pic feller or is it removable from the tow ball? not the best of your it show and tell pix just thinking as an old tester if it is a permanent over hang then ? drive by snag + man on push bike = finger wagging from the blue boys ?? but you prob have that sorted knowing you lol, good I deer


    Edit message to self read all the post ( it slide's over the bumper )
    Last edited by paul o'; 06-08-2015 at 21:17.

  4. #4
    One man and his welder - nice one Tim
    For Gods sake - don't tell her how much I've spent

    Ctrl-Alt FACT

  5. #5
    Quote Originally Posted by paul o' View Post
    How's it fitted to the bumper ? looks like its now over wide pass your arches and the police may give you a tug from that pic feller or is it removable from the tow ball? not the best of your it show and tell pix just thinking as an old tester if it is a permanent over hang then ? drive by snag + man on push bike = finger wagging from the blue boys ?? but you prob have that sorted knowing you lol, good I deer


    Edit message to self read all the post ( it slide's over the bumper )
    It is obvious to me it slides over the end of the bumper and only protrudes when in use...

  6. #6
    Quote Originally Posted by paul o' View Post
    How's it fitted to the bumper ? looks like its now over wide pass your arches and the police may give you a tug from that pic feller or is it removable from the tow ball? not the best of your it show and tell pix just thinking as an old tester if it is a permanent over hang then ? drive by snag + man on push bike = finger wagging from the blue boys ?? but you prob have that sorted knowing you lol, good I deer


    Edit message to self read all the post ( it slide's over the bumper )
    Quote Originally Posted by Hereford View Post
    One man and his welder - nice one Tim
    Quote Originally Posted by Greymaster View Post
    It is obvious to me it slides over the end of the bumper and only protrudes when in use...
    Quote Originally Posted by Thetownie View Post
    Nice one Tim.
    Very Kind of you to say...
    Stalking is very much like going to the night club

    You can always tell an Essex Boy, just you cant tell him much...

    An hour in the field is worth a week of typing trash.....




  7. #7
    Looks like an excellent way to avoid a sore back!

    What is the swivel / bearing configuration? A bolt and the plate faces?

    Alan

  8. #8
    Quote Originally Posted by Alantoo View Post
    Looks like an excellent way to avoid a sore back!

    What is the swivel / bearing configuration? A bolt and the plate faces?

    Alan
    Yes Alan, 2 bits of 13mm off cuts with a 16mm 10.9 nm bolt, In its original form I used it to lift the old type acetylene cylinder in my mobile welding trailer on a change over when empty. Also the 3 meter cutting heads off piling rigs were a bit much and to get the end off the ground when putting new tip holders on was much easier!!

    Tim.243
    Stalking is very much like going to the night club

    You can always tell an Essex Boy, just you cant tell him much...

    An hour in the field is worth a week of typing trash.....




Similar Threads

  1. Home made shotgun
    By johndeere in forum Videos
    Replies: 9
    Last Post: 17-06-2015, 10:02
  2. Home made Pull Through
    By john444334 in forum Cleaning, Gunsmithing and Equipment Care
    Replies: 4
    Last Post: 14-05-2013, 11:48
  3. New home made sticks
    By adjman in forum Equipment & Accessories
    Replies: 1
    Last Post: 10-03-2013, 14:28
  4. Home made sling
    By TobyH in forum Equipment & Accessories
    Replies: 2
    Last Post: 03-04-2011, 13:44
  5. Home-made Knife
    By chickenman in forum Equipment & Accessories
    Replies: 19
    Last Post: 15-03-2010, 11:54

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •