Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Peli riflecase

  1. #1

    Peli riflecase

    I want to get a Peli case for a blaser r93. Can anyone point me in the right direction? Uk suppliers and even better which model for a R93. Thankyou.

  2. #2
    Dan, If you want to borrow one for a trip or two, you are welcome to borrow mine already cut out for my R93.
    I tend to use the original Blaser case with a canvas case around that now.
    To buy one, expect to pay around the 200+

  3. #3
    Bought a peli case, expensive but buy once and compared to rifle & scope a n brainer. I just measured the overall rifle dims and bought on line. Can't find the receipt but just google and find best deal. You then just lay the rifle on the foam, mark with chalk and cut out with elec kitchen knife. I did mine so I can use with each if my rifles plus cutouts for mod, mag etc.

  4. #4
    I would take a look here: http://www.waterproof-cases.co.uk/contact-us/

    These guys are friendly, know their product inside out and will help you select the right case. I went up there with my gun and they did the donkey work for me, but friends from further afield have phoned them and they selected the right cases from measurements given to them.

    regards


    Ian

  5. #5

  6. #6
    Peli Storm IM3100 seems to be one of the best sizes for a break down rifle/s. Here's my first attempt, with a Browning Maral, & Chapuis double.

    I later refitted it for a scope too.

  7. #7
    Quote Originally Posted by Lateral View Post
    Peli Storm IM3100 seems to be one of the best sizes for a break down rifle/s. Here's my first attempt, with a Browning Maral, & Chapuis double.

    I later refitted it for a scope too.
    Nice job! Did you cut the foam yourself? If so, what did you use?

  8. #8
    Quote Originally Posted by rabbitter View Post
    Nice job! Did you cut the foam yourself? If so, what did you use?

    These things always look better in the pictures, than they do in the flesh ! I tried finding someone to do it professionally, but gave up.

    I made templates out of cardboard, keeping them a "little" on the tight side, and played around with the layout until I was happy, then transferred the pattern to the foam.

    Making the Templates on the small side, allows for drawing around them, makes sure the parts are held snugly, but also makes you look better at doing this, than you really are.

    Just don't let your mates see the case with the parts out

    I used a long thin carving knife for pretty much all of it. You need to commit, and try to do the cut in one long cut, rather than "sawing" at it, which leaves uneven jagged edges. I sharpened the blade after every few cuts, because the foam blunts it very quickly. It's nigh on impossible to "tidy" mistakes, the full depth of the foam, but I used a sharp pair of scissors to tidy around the top edges, which is all you see when the parts are fitted.

    I used a little spray glue to hold the top, & bottom foam blocks in place, then modified the bits I cut out, to follow the shape of the parts, and support them, so they sat nice, and level.


    Mark

  9. #9
    Boarboy,

    a Peli 1700 or Storm iM3100 are ideal for an R93 or R8. Will take stock, scope, bolt and two barrels if needed!

    much more portable than the longer 1750

    DT

  10. #10
    Quote Originally Posted by EMcC View Post
    Dan, If you want to borrow one for a trip or two, you are welcome to borrow mine already cut out for my R93.
    I tend to use the original Blaser case with a canvas case around that now.
    To buy one, expect to pay around the 200+
    Thanks for the offer Eddy, but I think I'm going to buy the peli storm 3100, I think it'll give me some good use over time. Thanks for all your replies. Do they do ammo boxes too?

Similar Threads

  1. *SOLD* peli case
    By 000bullet000 in forum Other Shooting Equipment
    Replies: 4
    Last Post: 28-03-2015, 09:21
  2. *SOLD* Peli 1700
    By jb7x57 in forum Firearms Components
    Replies: 1
    Last Post: 21-05-2014, 21:03
  3. *SOLD* Peli 1750
    By Wrens Mews in forum Other Shooting Equipment
    Replies: 3
    Last Post: 31-03-2014, 15:42
  4. Wanted Peli 1700
    By kevhumps in forum Other Shooting Equipment
    Replies: 9
    Last Post: 21-08-2013, 21:14
  5. *SOLD* Peli 1750 case in olive green with new peli foam inserts
    By bobbroom in forum Other Shooting Equipment
    Replies: 1
    Last Post: 05-11-2012, 12:44

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •