Results 1 to 9 of 9

Thread: moderator

  1. #1

    moderator

    Can anyone give me some advise as to which moderator they would recommend for a .308 Tikka T3 Lite please.

    Thanks

    Joe

  2. #2
    budget?
    what is more important weight or noise reduction?

    lots out there

  3. #3
    Lots of choice on this one but I can recommend the A-tec maxim currently on my sako also in 308 works really well pretty light and very good sound reduction I use it with five baffles I like it.......



    Damian


  4. #4
    Hardy Gen IV

    Good noise reduction, very good on the weight, aesthetically pleasing too!

    North Stalker

  5. #5
    Quote Originally Posted by dlz90 View Post
    Lots of choice on this one but I can recommend the A-tec maxim currently on my sako also in 308 works really well pretty light and very good sound reduction I use it with five baffles I like it.......



    Damian
    Maxim currently being phased out and replaced by the Hertz according to the importer

  6. #6
    Just bought the atec hertz 119 for my 6.5 very impressed by it light , and sound reduction is very good ,

  7. #7
    DPT... wouldn't even consider anything else

  8. #8
    Atec cmm4 on my t3 in .308.
    Very light and good noise reduction although it does extend your barrel quite a bit.

  9. #9
    Quote Originally Posted by Vipa View Post
    DPT... wouldn't even consider anything else
    With Vipa on this one. Just fitted one on my .308 M595. Well impressed and now in the process of replacing the T8 on my 22-250.

    ATB Lee

Similar Threads

  1. T8 moderator, annoying "tinkle" / Moderator care?
    By martinrs in forum Cleaning, Gunsmithing and Equipment Care
    Replies: 32
    Last Post: 14-02-2016, 21:39
  2. Replies: 47
    Last Post: 12-03-2015, 22:28
  3. *SOLD* Moderator
    By white van man in forum Firearms
    Replies: 0
    Last Post: 08-06-2014, 15:58
  4. *SOLD* Vaime/Vaimeco Moderator - cheap fullbore moderator!
    By Dodder in forum Firearms
    Replies: 4
    Last Post: 16-04-2013, 09:32
  5. T 8 Moderator barrel screw fitting to rear of moderator
    By philip in forum Equipment & Accessories
    Replies: 7
    Last Post: 07-02-2013, 19:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •