Results 1 to 3 of 3

Thread: Hornady Bullet Comparator Thumb Screw

  1. #1

    Hornady Bullet Comparator Thumb Screw

    Has anyone else had problems with their Hornady Bullet Comparator Body Thumbscrew?

    I ordered one from Brownells and assembled it, the thread came straight off the brass thumbscrew, having looked at the screw it is slightly crooked.

    I've emailed Brownells about it and not had much in the way of a reply since they asked how I would like to resolve the matter.

    if anyone has replaced their thumbscrew for another screw I'd be grateful to know what they replaced it with.
    I've been to Maplin and they have computer case screws with 6/32 threads, but they come up too short at 8mm long, not had much luck on eBay either!

    Has anyone else had the same issue?

  2. #2
    Not had the same issue, but if you don't wish to return it for replacement, drill and tap it yourself

  3. #3
    Contact Hornady & see what they say??
    Blaser K95 Luxus Kipplaufbüchse .25-06Rem. Zeiss 8x56, 110gn Nosler Accubond = Game Over!

Similar Threads

  1. *SOLD* Hornady .270 Comparator insert
    By Tackleberry270 in forum Reloading
    Replies: 3
    Last Post: 03-09-2014, 10:09
  2. *SOLD* Hornady/Stoney point OAL gauge and Bullet comparator
    By Old tikka in forum Reloading
    Replies: 0
    Last Post: 05-06-2014, 07:51
  3. Wanted Comparator nut/hornady insert
    By plonker in forum Reloading
    Replies: 3
    Last Post: 05-05-2014, 13:44
  4. Wanted Hornady comparator insert 6.5x55
    By Tackleberry270 in forum Reloading
    Replies: 1
    Last Post: 04-11-2013, 17:56
  5. Wanted Hornady Lock-N-Load Bullet Comparator Body
    By maffs in forum Reloading
    Replies: 3
    Last Post: 10-11-2012, 16:01

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •