Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Quickload info required

  1. #1

    Quickload info required

    Afternoon all,

    I don't have access to my Quickload program at the moment, can someone help?

    data is .243 win, 36 grains Ramshot TAC, 95 SST Hornady bullet, standard seating depth.

    looking for the maximum ceiling with a screen shot if possible. I believe the max pressure is up around 38 grains?

    regards

    Carl.





  2. #2
    just run it with 24" barrel max load is 40.5 grns mv 3050 99.92% burnt.

    Hope that helps.

    D

  3. #3
    36 grn Tac mv 2762 98% burnt

    D

  4. #4
    D

    Many thanks for the assistance, can you run a 20 inch barrel please. Can I be cheeky and ask for a screen shot. Did you run the standard seating depth for that bullet in the Hornady manual?

    Carl.





  5. #5
    Silly thought, but why not try the manufacturer? They are pretty good about answering emails quickly?~Muir
    Last edited by Muir; 10-05-2016 at 23:47.

  6. #6
    Quote Originally Posted by Muir View Post
    Silly thought, but why not try the manufacturer? They are pretty good about answering emails quickly?~Muir
    Don't think they would send out information advising others on reloading recipes, god forbid they got it wrong and a re loader got hurt! I have plenty of experience with the program but just didn't have it to hand.





  7. #7
    Actually. they will do just that. Really decent folks at Western Powders. Visit their site sometime if you get the urge.~Muir

  8. #8
    Quote Originally Posted by Muir View Post
    Actually. they will do just that. Really decent folks at Western Powders. Visit their site sometime if you get the urge.~Muir
    Did that, no Ramshot TAC combo on .243.





  9. #9
    Carl,

    May get a chance to run it tonight, not sure how to do a screen shot, give me a call on my mobile no and we will see.

    D

  10. #10
    Quote Originally Posted by Cyres View Post
    Carl,

    May get a chance to run it tonight, not sure how to do a screen shot, give me a call on my mobile no and we will see.

    D
    D

    All done now, got my other laptop up and running with the software. Many thanks for the offer though.

    Carl.





Similar Threads

  1. Quickload info please
    By Dagben77 in forum Ammunition, Reloading & Ballistics
    Replies: 15
    Last Post: 30-05-2014, 12:34
  2. Info required
    By Rich h in forum Ammunition, Reloading & Ballistics
    Replies: 22
    Last Post: 12-05-2013, 14:28
  3. Required info
    By tish tosh in forum Introductions
    Replies: 3
    Last Post: 11-02-2013, 12:33
  4. Quickload Expert Required.
    By robbobsam in forum Ammunition, Reloading & Ballistics
    Replies: 4
    Last Post: 04-02-2011, 08:20
  5. Quickload data required!
    By Jonher in forum Ammunition, Reloading & Ballistics
    Replies: 2
    Last Post: 26-02-2010, 09:49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •