Results 1 to 2 of 2

Thread: Minox spotter with digiscope add-on

  1. #1

    Minox spotter with digiscope add-on

    Re the title I just bought the Minox DCM to add to my Minox spotter will keep folks informed as to the results.

  2. #2
    Well first off the thing would not bayonet fix into the spotters occular opening it kept coming out loose so I called the shop& they called Minox and turns out it will only fit in correctly at one of the three possible positions which leaves the DCM not vertical but then there is a small holding screw on the side which needs to be let off then rotate the DCM to correct position and tighten again then all was well It gives a 40x magnification.
    But non of this was noted in the 3 language Minox manual (sloppy from Minox IMO).

Similar Threads

  1. Wanted thermal spotter
    By griffshrek in forum Optics
    Replies: 12
    Last Post: 12-04-2016, 22:48
  2. *SOLD* Seben Camera/Scope Mount - Digiscope mount
    By bewsher500 in forum Optics
    Replies: 6
    Last Post: 03-01-2016, 10:22
  3. Thermal spotter
    By Double four in forum Equipment & Accessories
    Replies: 24
    Last Post: 03-04-2015, 17:45
  4. *SOLD* nv spotter
    By bobjs in forum Other Shooting Equipment
    Replies: 9
    Last Post: 17-02-2015, 12:12
  5. Nitesite Spotter
    By Lucky Sniper in forum Equipment & Accessories
    Replies: 5
    Last Post: 18-09-2014, 21:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts