Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: sako 34mm mounts

  1. #1

    sako 34mm mounts

    Hi guys does anybody know anywhere i can get a set of mounts to fit my sako 75 to hold a 34mm zeiss 6_24_72
    Many thanks
    Ben

  2. #2
    Leupold QR base with a set of their 34mm high rings should work but check they give enough height

  3. #3
    Thank you for the reply

  4. #4
    The gent in the link may be able to help, also found in the similar threads below.

    Sold: Sako Optilock mounts and bases.34mm.

    he might be worth a PM, as to who he got to do the work.

    also have you thought of a picatinny rail with a set of 34mm high mounts on top?.

    Recknagel Picatinny Rail Sako Short, Alu [..0014]

  5. #5
    I have some 34mm optilock rings for sale. Just add normal optilock bases to suit.

    That said, i might have them too

    Sent from my SM-G925F using Tapatalk
    Sako TRG-42 folder .338LM🔫 Sako TRG-22 .308/.260🔫 Tikka 595 .222(NV'd up) 🔫 AR15 .223/300BLK 🔫Franchi 12g 520 9shot🔫Baikal .410 stealth🔫Ruger #1.243

    Home | Varminting UK

  6. #6
    hi, I've got a pair of optilock bases with 34mm blazer rings attached to them never been used if you are interested,

  7. #7
    Hello mate how much do you want for them and will they take a 72 mm zeiss scope

  8. #8
    Who ? Me or mannlicher ?

    Sent from my SM-G925F using Tapatalk
    Sako TRG-42 folder .338LM🔫 Sako TRG-22 .308/.260🔫 Tikka 595 .222(NV'd up) 🔫 AR15 .223/300BLK 🔫Franchi 12g 520 9shot🔫Baikal .410 stealth🔫Ruger #1.243

    Home | Varminting UK

  9. #9
    I have my doubts that the standard Sako Optilock 34mm rings will be high enough for the big Zeiss, hence my Leupold recommendation.

    I used to have a Sako 85 (very similar to a 75) with a 34mm 5-25x56 S&B on top mounted on Optilocks, I reckon there was about 5mm clearance on the barrel and I think you would need roughly at least 7mm to mount the Zeiss.

    As has been suggested you could alternatively use a pic rail and then there is plenty of choice of high rings to suit, the Recknagel rails are commonly available but personally I don't like them, too many parts for my taste and they sit too high on the action, but this might be a good thing in this case.

  10. #10
    I tried a picatinny rail on my Sako 75, Alan Rhone recommended a Contessa as the Recknagel ones sometimes require a bit of hand fitting due to production tolerance variations in the Sako action. Anyway, i mounted a Nightforce 56mm obj in TET medium rings and this is how it sat:
    Attachment 71029

    Perhaps not a lot of use, but thought it may give you an idea of how much clearance you could expect.

Similar Threads

  1. *SOLD* Sako Optilock mounts and bases.34mm.
    By sako751sg in forum Optics
    Replies: 1
    Last Post: 16-01-2016, 22:41
  2. Wanted 34mm mounts
    By Treedave in forum Firearms Components
    Replies: 6
    Last Post: 10-11-2014, 01:06
  3. Replies: 0
    Last Post: 05-03-2013, 23:12
  4. Wanted 34mm mounts
    By ubique in forum Optics
    Replies: 0
    Last Post: 28-02-2012, 22:41
  5. Swap 34mm mounts
    By j0e_bl0ggs in forum Optics
    Replies: 1
    Last Post: 20-10-2011, 06:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •