Results 1 to 5 of 5

Thread: ramshot tac

  1. #1

    ramshot tac

    Hi guys, in the process of developing a load for my zkk601 .308 using the above and hornady 150grn interlocks, just wondering if any memmber uases the same or any input would be great.
    Thanks Neil

  2. #2
    There is a 4.6 grain spread between minimum and maximum: 41.6 t0 46 grains. The MAX load develops 61.3K PSI pressures for 2916 fps. You will need to work up loads for your individual rifle starting at minimum. Nobody can give you a load that will work in your rifle.

    If you want your loads to fall in line with the data provided by Western Powders you will need to FL resize and seat the bullet to recommended OAL.~Muir


  3. #3
    Only safe way is to invest in the Hornaday Handbook of Cartridge Reloading , you get all the info you need to do the job safely
    as Muir says you need to work up the round to suit YOUR Rifle
    Ray

  4. #4

  5. #5
    My best accuracy with 150-gr Hornady flat base Interlock and TAC is 45.0 grains with Federal 210 Match primers in match brass, at 2.80 inches COAL. If you use heavier brass or longer bullets, you will have to reduce the load. To my mind, 46.0 is too hot a load for my rifles, which I use in high temperatures, and groups became larger above 45.0 grains.
    Last edited by Southern; 26-06-2016 at 15:50. Reason: longer bullets

Similar Threads

  1. Ramshot Tac
    By cumbrian in forum Ammunition, Reloading & Ballistics
    Replies: 5
    Last Post: 23-09-2014, 19:51
  2. reloading 243 with ramshot tac
    By nicky-hoskins in forum Ammunition, Reloading & Ballistics
    Replies: 15
    Last Post: 16-09-2014, 20:13
  3. reloading 50 grn v max with ramshot tac
    By nicky-hoskins in forum Ammunition, Reloading & Ballistics
    Replies: 10
    Last Post: 24-08-2014, 22:57
  4. Ramshot Tac + 168grain A-max Problems!
    By Sabian223 in forum Ammunition, Reloading & Ballistics
    Replies: 10
    Last Post: 30-04-2013, 11:55
  5. Ramshot
    By finnbear270 in forum Ammunition, Reloading & Ballistics
    Replies: 12
    Last Post: 26-06-2010, 13:50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •