loads for the .270

110gr GS Custom bullet, 64gr Ramshot Hunter, Federal 215 primer, collet neck sized Norma brass, 3.340" COAL

3450+ fps out of my 22.4" Tikka T3
 
54gr H4831, CCI primer and a 130gr Sierra Gameking using Federal brass. Lovely soft-shooting round that causes very little carcass damage on roe, but will still drop reds at sensible ranges :thumb:
 
57.0grn of N160, cci primer and a 130grn sierra gameking. Clover leaf groups and roughly 2950fps. Only shot about 15 beasts with that load so far but so far the bullet performance is really impressive. Shot reds, roe, fallow and goats with it so far.
 
thanks guys I've ordered reloader 22 and some 130gr SGK I'll give it a go when I get my FAC back!
 
58gr of H4831 with 130gr Hornady partition at 2800fps and 56.5gr R22 with 150gr RN at 2750fps which is the same as Federal and Hornady 150gr factory loads in my rifle.
 
funny
a lot of the real world MVs are way off the factory spec (3050-3100fps 130gr)

I use 54.5gr N160 130gr interlocks, norma brass CCI200 for 2760fps
lovely load to shoot, still punchy enough to drop a big stag but not blow chunks out of roe
 
I am waiting for sikamalc to post up his pet load. I have used it on roe, sika and reds and been completely pleased with the performance each and every time.
 
Back
Top