Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Which 30mm Rings for CZ 550 ?

  1. #1

    Which 30mm Rings for CZ 550 ?

    Can anyone recommend which 30mm scope rings will fit a CZ 550 American, I currently use a set supplied by CZ but I now need a 30mm set,
    the scope is a Meopta Artemis 3-12x50

    PS How do I work out if I can use low/med/high rings ? I have read the lower the better...

    Have spotted this one piece mount which looks ok
    http://opticswarehouse.co.uk/product...e-scope-rings/

    Many thanks

    Lloyd

  2. #2
    I have a 550 and have used warne medium rings with a s and b 8 x 56 and currently a 2.5-10x 50 so I would go for mediums. They do not do lows as far I'm aware. I assume this is because a lower mounted scope will foul the bolt handle.

    good rings I reckon. Very solid, although awkward to level the scope properly but can be done with a bit of patience.

  3. #3
    Sportsmatch HT075.

    http://www.sportsmatch-uk.com/30mm-d...e-arrestor-pin

    Half the price of Warne & less fiddly. Plain but effective.
    Ammo collector & cartridge geek Ö. if I donít have it you donít shoot it.

  4. #4
    Quote Originally Posted by Sinistral View Post
    Sportsmatch HT075.

    http://www.sportsmatch-uk.com/30mm-d...e-arrestor-pin

    Half the price of Warne & less fiddly. Plain but effective.
    They only appear to do high ones. Will this make a big difference ?

  5. #5
    Wouldn't put cheap aluminium rings on a cf myself but if they work that's fine.

  6. #6
    Quote Originally Posted by J111 View Post
    Wouldn't put cheap aluminium rings on a cf myself but if they work that's fine.
    http://opticswarehouse.co.uk/product...ial-receivers/

    Do these ones fit the bill? In 30mm mediums

  7. #7
    That's what I have yes mate.

  8. #8
    If I have quick release scope rings and take scope off then put it back on I'm assuming there will be no change in scope zero?

    Just wondering as I've heard of rifles losing zero etc after taking a bump.

    Is this a reliable way to swap scopes e.g. Night vision and day scope and not lose zero when putting Day scope back on ?



  9. #9
    Good mounts & test, test, test until you have confidence in the system. I use a torque screwdriver to tighten so it's as consistent & repeatable as it can be.

  10. #10
    Quote Originally Posted by Sinistral View Post
    Sportsmatch HT075.

    http://www.sportsmatch-uk.com/30mm-d...e-arrestor-pin

    Half the price of Warne & less fiddly. Plain but effective.
    +1 for Sports Match.
    They also offer a quick email advisory service: Email them your rifle and scope brand and model , and they will promptly advice on the best system from their range.
    • Do not be seduced by the marketing-men....

Similar Threads

  1. Replies: 5
    Last Post: 09-09-2016, 04:39
  2. *SOLD* Third Eye 30MM Sako Rings for Weaver Third Eye 30MM rings
    By easypeasy in forum Firearms Components
    Replies: 1
    Last Post: 16-11-2014, 21:02
  3. Wanted wanted or swap 30mm optilock stainless low for 30mm medium rings!
    By karbon77 in forum Firearms Components
    Replies: 0
    Last Post: 28-02-2014, 04:39
  4. Replies: 2
    Last Post: 30-09-2012, 13:45
  5. Wanted Swap Optilock 30mm medium rings for a set of low 1" or 30mm
    By Leupsak in forum Deer Stalking Equipment
    Replies: 2
    Last Post: 20-08-2010, 14:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •