Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: tikka m595 222

  1. #1

    tikka m595 222

    hi i have for sale a tikka m595 222
    it has been cut to 18 inchs and threaded m14x1 by richard pope of swift percision rifles. [ we had it cut to this length to use as a truck gun and keep the weight down for my dad. 18 inch's is ideal length if you want a compact 222 as it doesnt use that much powder and using reloader 7 you can still keep the fps up with short barrel
    the stock and action are in superb condition. the barrel has a little wear but the rifle shoots spot on
    here is a 4 shot group at 100 yards with reloaded ammo we use in it. 40 grain blizkings, cc1 benchrest primer. reloader 7 powder,ppu brass

    the rifle still shoots to 1/2 inch with 50 grain tnt bullet and reloader 7 powder,cci bench rest primer,ppu case.
    here is the picture of the rifle.




    im looking for 395 for the rifle with the optiloc rings and bases and the 3 shot mag. if you collect it will also come with some reloads i have made for the rifle that shoot as the picture above
    Last edited by jay 22; 06-11-2010 at 13:23.

  2. #2
    come on lads this has to go. i also have a 3 die redding set i can let you have at a little extra cost

  3. #3
    would you be prepared to send the rifle to an RFD that is local to me, obviously at my cost?

    Would you also sell the Mod with it?
    There is a place on this planet for all of God's creatures, right next to my tatties and gravy!!!

  4. #4
    hi mate yes i can send it to your rfd it will be around 20 to 25 pound. as for the ase mod i cant sell that sorry. as its going on a different rifle

  5. #5
    Quote Originally Posted by jay 22 View Post
    hi mate yes i can send it to your rfd it will be around 20 to 25 pound. as for the ase mod i cant sell that sorry. as its going on a different rifle
    Let me speak to my nearest RFD(he is known for charging considerable amounts of money for his services) and Il get back to you.

    If he is going to be unreasonable Il speak to Gregor in Tain.
    There is a place on this planet for all of God's creatures, right next to my tatties and gravy!!!

  6. #6
    ok dan no problem mate. it is a bargain. and very accurate, i prob will miss it when its gone but need to get a 20 caliber as we have allways wanted one. see if they are as good as everyone says. if not will more then likely go back to 222 again !

  7. #7
    still for sale guys. dan couldnt have it in the end. due to his rfd wanting 50 pound to take the transfer !

    just wouldnt have been worth it in the end for him.

  8. #8
    must sell now due to new 6mm
    bare rifle 330 NOW 310
    rifle with optilock bases and rings and 30 rounds of ammo 370 NOW 350

    rifle with optilock bases and rings and 30 rounds of ammo with redding 3 die set 420 NOW 400

    rifle with optilock bases and rings and 30 rounds of ammo with redding 3 die set, over 3/4 tube of reloader 7 powder, and 74. 224 50 grain speer tnt hollow point bullets. and 30, 40 grain blizking bullets 450 pound NOW 430
    Last edited by jay 22; 28-11-2010 at 17:06.

  9. #9
    Last chance guys before i log her with rfd

  10. #10
    Hi Jay22

    Just a quick question

    Would you consider selliing the Redding die set seperately ?

    Thanks
    Alan

Similar Threads

  1. For Sale Tikka M595 6mm BR
    By twg1 in forum Firearms
    Replies: 32
    Last Post: 07-01-2011, 11:03
  2. *SOLD* sale of tikka m595 222 very good condition and accuracy
    By jay 22 in forum Firearms
    Replies: 0
    Last Post: 22-10-2010, 16:35
  3. Tikka M595 Bolt
    By Moonraker68 in forum Deer Stalking General
    Replies: 3
    Last Post: 15-11-2009, 00:23
  4. Wanted: Tikka M595 magazine
    By novice in forum Firearms Components
    Replies: 4
    Last Post: 17-08-2009, 08:22
  5. Tikka M595 7mm-08
    By Moonraker68 in forum Deer Stalking Equipment
    Replies: 1
    Last Post: 01-06-2009, 13:49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •