Results 1 to 2 of 2

Thread: 95gsst for .243 loads

  1. #1

    95gsst for .243 loads

    I am using a Sako 85 (1 in 10 twist), very accurate with hornady 100g BTSP

    Just wondering if anyone has good results using honady 95g SST in .243, if so what load?
    The bearing surface of the 95g SST is very long,so not sure if they will work for me?

  2. #2
    Mark they should be ok in your sako .

    I use lap brass, fed mag primer,and 41.5 gr H414, col is from memory 2.715 which is 15 thou from the lands

    Rifle ssg 69 .243 1 in 10 also . The load is well within in my rifle but you may need to start lower . Good luck let me know how you get on . Brough

Similar Threads

  1. .243 Loads
    By R700ROE in forum Ammunition, Reloading & Ballistics
    Replies: 10
    Last Post: 21-11-2010, 14:15
  2. Help please with .243 loads. I am just starting out !!!
    By robbobsam in forum Ammunition, Reloading & Ballistics
    Replies: 8
    Last Post: 01-09-2010, 16:47
  3. .243 and loads
    By pg2008 in forum Ammunition, Reloading & Ballistics
    Replies: 14
    Last Post: 27-07-2010, 16:41
  4. .243 loads
    By carlisleredneck in forum Cleaning, Gunsmithing and Equipment Care
    Replies: 1
    Last Post: 20-04-2010, 20:06
  5. 243 loads
    By john clem in forum Ammunition, Reloading & Ballistics
    Replies: 1
    Last Post: 09-04-2010, 15:53

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •