Results 1 to 6 of 6

Thread: CZ 455 Trigger kit

  1. #1

    CZ 455 Trigger kit

    Has anyone here fitted a trigger kit to a new CZ455 rimfire?

    Having an issue and could do with running a question by someone that has.

  2. #2
    i have, i took it off because the rifle wouldent fire each time

  3. #3
    Did you remove the sear ball bearing or not?

    The instructions are all for 452 actions

    And how did you put it back?

  4. #4
    Quote Originally Posted by garyb View Post
    Did you remove the sear ball bearing or not?

    The instructions are all for 452 actions

    And how did you put it back?

    I ahev fitted a kit on a 452. If its the same then NOOOOO do not touch the sear ball. For the 452 you knock out the pin on the opposite side to the sear pin slide the required ring over the pin and then refit with the requried spring. If you do need to take the ball out then make sure you cover it somehow because Ive heard they shoot out.

  5. #5
    Quote Originally Posted by stevienicknacks View Post
    I ahev fitted a kit on a 452. If its the same then NOOOOO do not touch the sear ball. For the 452 you knock out the pin on the opposite side to the sear pin slide the required ring over the pin and then refit with the requried spring. If you do need to take the ball out then make sure you cover it somehow because Ive heard they shoot out.
    Same here! I used a 'YoDave' kit, which requires the removal of 2 pins, one of which is replaced with the substitute part supplied.

    ATB

    T

  6. #6
    Quote Originally Posted by thomas View Post
    Same here! I used a 'YoDave' kit, which requires the removal of 2 pins, one of which is replaced with the substitute part supplied.

    ATB

    T
    Yes, sorry, 2 pins to push out but not the one at the sear end.

Similar Threads

  1. CZ 455 American
    By Border in forum Rifles & Calibres
    Replies: 13
    Last Post: 19-05-2011, 19:14
  2. CZ .17 Trigger
    By pwolstenholme in forum Rifles & Calibres
    Replies: 5
    Last Post: 02-05-2011, 15:54
  3. CZ 452 Replacement Trigger Guards
    By Heym SR20 in forum Rifles & Calibres
    Replies: 7
    Last Post: 14-05-2010, 16:55
  4. CZ trigger problem
    By kernel gadaffi in forum Ammunition, Reloading & Ballistics
    Replies: 11
    Last Post: 30-11-2008, 15:20
  5. WANTED AFTERMARKET TRIGGER KIT FOR HOWA.
    By TONY M in forum Firearms Components
    Replies: 0
    Last Post: 08-04-2008, 20:26

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •