Results 1 to 8 of 8

Thread: Mauser 98 mounts

  1. #1

    Mauser 98 mounts

    Does anyone out there have a set of Leupold 52370 mounts,these are to fit a 98 Mauser commercial action with the stripper clip cut-away. Ian.

  2. #2
    For some reason I've got the back mount in Leupold QR but not the front.

    I can't imagine that would help but you never know.

  3. #3

    98 mounts

    Quote Originally Posted by kingstonandy View Post
    For some reason I've got the back mount in Leupold QR but not the front.

    I can't imagine that would help but you never know.
    Hi,ive got the front mount but not the back,which is for FN mauser etc. is the any chance of you taking some measurements of the mount that you have.Regards,Ian.

  4. #4
    You're kidding?!

    Certainly, what would you like measuring?

  5. #5
    The standard Mauser receiver ring projects higher than the rear bridge so a higher integral ring, or deeper mounting block (where separate rings and blocks are used) is needed at the rear to get a parallel mounting plane.

    When I had Heym SR20N's (Mauser actions) with separate Weaver rings and Weaver blocks the front and rear mount blocks had different heights. It's a standard difference in Millimetres - no matter which brand of mounting system is used or who makes it.

    If you put a dial-caliper across the two curved faces top and bottom to get the depth Ian will have the info. he needs.

    I think I've got the action dimensions to confirm they'll mate OK, but don't know whether the curvature/profile underneath will mate with the rear receiver he has.

  6. #6

    measurement

    Thank for your help.Regards,Ian.

  7. #7
    Height from the top of the radius to the ring mating surface is 0.405".

    Its yours if you want it.

  8. #8

Similar Threads

  1. For Sale E.G.W 98 LARGE RING MAUSER TACTICAL SCOPE MOUNT RAIL 0 m.o.a
    By glyn in forum Deer Stalking Equipment
    Replies: 1
    Last Post: 11-01-2012, 11:10
  2. .308 Norm mag mauser `98 commercial.
    By johngryphon in forum Rifles & Calibres
    Replies: 1
    Last Post: 01-05-2011, 08:42
  3. BRNO BO98 (new BRNO mauser 98)
    By harrygrey382 in forum Rifles & Calibres
    Replies: 18
    Last Post: 23-11-2010, 09:15
  4. *SOLD* warne weaver mounts. and hilver talley mounts with bases ?
    By jay 22 in forum Deer Stalking Equipment
    Replies: 1
    Last Post: 17-09-2010, 13:43
  5. trigger mech for mauser 98
    By stone in forum Rifles & Calibres
    Replies: 3
    Last Post: 11-08-2008, 17:48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •