wabbiter
Member
Hi all Am just putting my first batch of Berger 140 gr VLDs together for my 6.5x55 and was seating my first one when i spotted a ring mark had appeared on the head just below the point. i decided to take the die apart to check it out and taper on the seating piece do`s not follow the bullet head at all and it only touches right at the bottom hence the mark. The die is a LEE 6.5x55 L2, can i get a replacement inner to match the VLD or will i have to get another die that is suitable for these tips. Any advice will be very much appreciated. Kev