Results 1 to 5 of 5

Thread: .243 steyr reloading 100gr sp & 90gr nosler bt

  1. #1

    .243 steyr reloading 100gr sp & 90gr nosler bt

    Has anyone got some good loads for 90gr nosler balistic tip and hornaday 100gr interlock sp preferably h380 or imr4350 through a steyr pro mountain II

  2. #2
    Try half a dozen with 38.1 of n140, works just as well with round nose and btsp at 100 grains, BOTH BY HORNADY

  3. #3
    Can't tell you about those two propellants.......but 44.5gns Vit N160, Rem 9 1/2 primer, & 95gn Nosler BT would easily produce 1/8" MOA @ 100yds from my .243 Stutzen. Cartridge OAL was 2.490" measured with a comparator.
    Blaser K95 Luxus Kipplaufbüchse .25-06Rem. Zeiss 8x56, 110gn Nosler Accubond = Game Over!

  4. #4
    Quote Originally Posted by cornishnick View Post
    Has anyone got some good loads for 90gr nosler balistic tip and hornaday 100gr interlock sp preferably h380 or imr4350 through a steyr pro mountain II
    Hi Nick.

    I use .243 Hornady IB`s in 87gr in my Pro hunter II. Powder is H380 x 42 Gr = ( in my rifle ) 3054 FPS / 1972 Ft-LB. Very flat load. Accurate, sub 0.75" - in my rifle, and a load unchanged for a long time... It is very reliable in all weather conditions. No fliers, unexpected changes in performance etc...

    All the best.

    Neil.

  5. #5
    Thanks for that, a few new ideas to try

Similar Threads

  1. For Sale Privi .243 SP 90gr
    By cumbrian in forum Firearms
    Replies: 2
    Last Post: 21-01-2012, 13:59
  2. *SOLD* 100 rounds .243 100gr Privi sp rounds
    By Simjim33 in forum Deer Stalking Equipment
    Replies: 2
    Last Post: 07-01-2012, 11:04
  3. Realistically - 100gr or 90gr in .243 ??? Appreciable difference ???
    By Lightyear in forum Ammunition, Reloading & Ballistics
    Replies: 23
    Last Post: 10-10-2011, 19:37
  4. .243 nosler 55g BT
    By PKL in forum Ammunition, Reloading & Ballistics
    Replies: 1
    Last Post: 16-09-2011, 01:15
  5. .243 100gr SP sako factory ammo
    By jcf1 in forum Deer Stalking Equipment
    Replies: 3
    Last Post: 21-02-2010, 12:40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •