Results 1 to 2 of 2

Thread: Blaser .223 Loads

  1. #1

    Blaser .223 Loads

    Hi Gents
    I have just taken ownership of a Blaser .223 with a heavy fluted barrel.
    Can anyone recommend a load or loads for both Target and Foxing?

    ATB

    DavieH

  2. #2
    Hello mate I've an lrs2 in 223. The load I use is for 69 grain sierra match kings. Case length 1.755 25.3 grains of blc2 powder and an overall length of 2.253. Start off at 24.5 grains and work your way up. This load gives me 2 inch groups at 500 yards. There's a small hollowpoint in these heads and they take down foxes no problem at all and very hard hitting and good in the wind. Make sure to full length size your cases as well.

Similar Threads

  1. Swap shed loads of .243 or .223 for .308 swap by weight?
    By Paul at Fechan in forum Reloading
    Replies: 0
    Last Post: 22-03-2012, 09:08
  2. Blaser.243 Loads
    By Drag1 in forum Ammunition, Reloading & Ballistics
    Replies: 5
    Last Post: 18-02-2012, 22:37
  3. Loads for .223 - 1-8 twist.
    By quiteman in forum Ammunition, Reloading & Ballistics
    Replies: 14
    Last Post: 23-03-2011, 10:52
  4. Remington 700 SPS Stainless .223, Looking for Loads ect
    By black lab in forum Ammunition, Reloading & Ballistics
    Replies: 7
    Last Post: 01-12-2010, 07:53
  5. whats going worng. .223 loads
    By mayfly in forum Ammunition, Reloading & Ballistics
    Replies: 7
    Last Post: 21-10-2010, 16:06

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •