Remmington .22 RF

Tom270

Well-Known Member
Does anyone else have trouble with Remmy .22rf subs loading in a bolt action (CZ452)
The round scoops out of the mag but will not advance the last 8mm into the chamber.
Other makes, Eley, Lapua etc been fine. I have several hundred Remmy's as they were a "bargain"
Thanks Tom
 
Last edited:
hi i have shot remy 22 subs with on trouble.are you usein a plaz mag.my cz452 did not like plaz mag or 10 shots mag also plaz
 
mine would shoot rems perfectly, but not cci's, try putting one in by hand without the mag, if it wont slot in, clean your rifle.i use to have a problem when i'd been shooting shorts then changed back to long rifle
 
I'm guessing the rim diameter/thickness is a tad large for your extractor. You can check by disassembling the bolt (for safety) and trying a live round under the extractor. If it's really hard, you can switch ammo or stone your extractor.~Muir
 
Back
Top