Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: www.laminategunstocks.co.uk / Paul Day

  1. #1

    www.laminategunstocks.co.uk / Paul Day

    Hi,has anyone had experience or know what is happening with Paul...Thanks

  2. #2
    Sparko......
    I had an enquiry with him on 20/8/12.... this was his reply.....




    Hi David,
    To give you an idea of all of the stock prices

    Sporter non thumbhole in any colour laminate with rosewood tip and palmswell with maple spacers, 1" recoil pad and sling sivels would be 200.00 plus postage.
    Duel grip/ straightline thumbhole as above 225.00+postage.
    Wildcat thumbhole as above 235.00+postage.
    Ebony tip and cap would be an extra 25.00.
    A tackdriver in any colour laminate with 1" pad , slingswivels would be 235.00+postage
    The target/ bench / Tactical stocks start at 250.00 with a 2.5" wide forearm, fitted with a 1" recoil pad.
    The stocks take about 14 weeks.
    I usualy ask for a 50% deposit to cover materials.
    I offer a full refund if you not happy with the stock for any reason!
    I supply fitting and finishing instructions with the stock.
    please feel free to contact me if you would like a chat about the stocks.

    Kindest regards,
    Paul.
    tel.01472 357988.


  3. #3
    I do believe laminategunstocks.co.uk are a middle man for Richards Microfit, get your stock direct from Richards and save about 100, however beware, these stocks need a lot of work and i mean a lot, to turn then into anything of reasonable quality.

    Ian.

  4. #4
    whitebeard is right i got one for my mach 2 had to have some work done on it and bedding to lift the action so the barrel could float but i aint no good at stock work
    end product turned out a nice job but doubt i would go down that road again not for a rimmy if i did i would have to get someone to finish it

  5. #5
    You would be better off getting a stock from boyds if they have your action already finished ready to fit it that's what I done cheaper to......

  6. #6
    i emailed this chap regarding some prices for a stock and he does take a long time to reply in my case well over a week

  7. #7
    Quote Originally Posted by Whitebeard View Post
    ....get your stock direct from Richards and save about 100, however beware, these stocks need a lot of work and i mean a lot, to turn then into anything of reasonable quality. Ian.
    Ian. That's spot on. I got my Richards Microfit stock direct and the stock cost was trivial compared to getting it finished and pillar bedded. d foxxer has my stock and 243 now. Regards JCS

  8. #8
    Well with having a look at joe west rifle stocks, made here in the UK

  9. #9
    I bought my first rifle from Paul and it was in tiptop condition. He showed me some of his stocks and they are very well made.
    Below is a link to my website.
    Quad sticks

  10. #10
    Quote Originally Posted by limulus View Post
    I bought my first rifle from Paul and it was in tiptop condition. He showed me some of his stocks and they are very well made.
    He most likely showed you stocks that are finished, they do not come like that from the factory and need many hours of finishing.

    Ian.

Similar Threads

  1. Stalking Directory Voucher Codes for www.scottcountry.co.uk
    By Scott Country in forum Deer Stalking General
    Replies: 0
    Last Post: 27-03-2012, 08:53
  2. Available booking at www.stalkinginengland.co.uk
    By stalkinginengland in forum Deer Stalking Opportunities
    Replies: 4
    Last Post: 14-08-2011, 10:12
  3. Available www.stalkinginengland.co .uk
    By stalkinginengland in forum Deer Stalking Opportunities
    Replies: 6
    Last Post: 18-06-2011, 20:39
  4. http://www.gallowaycountryfair.co.uk/
    By centralbeltstalker in forum Events and Meetings
    Replies: 17
    Last Post: 22-09-2010, 18:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •