Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: dies and brass wanted please.

  1. #1
    SD Regular bobjs's Avatar
    Join Date
    Sep 2009
    Location
    Tidworth/on here/or at Downton Abbey.
    Posts
    8,831
    Blog Entries
    5
    View my Gallery (39)View my Gallery (39)

    dies and brass wanted please.

    Hi Lads,

    if you fancy any the remaining items drop me a pm re: swaps.


    i am thinking of trying to do my own 20 tac brass from .223 so i am looking for the following bits.

    1, 223 fl die

    2, some new 223 brass,about 50 or so would be good,

    Im a very short of readies at this time so have a few bits here for swaps,



    Attachment 20008
    1, 20 tac brass THE OLD 20 TAC BRASS HAS GONE.

    2, jack pick bolt holster as new,

    3, RCBS 243 win seating die little use,

    4, top single piece mount 1" high dovetail fitting

    5, middle single piece mount same as above

    6, Bottom mount same as above but medium height dovetail fitting

    7, Lee 2 die set in 243 win seater and neck dies,

    8, gone in a swap

    9, as above

    10, as above

    11, as above.

    13, weaver/picatinny rail steel 1"/25mm mounts

    14, Steel Tikka action mounting rings 1"/25mm HiGH

    15, Steel Tikka action mounting rings 1"/25mm Medium

    all items are my own second hand items and are in used but fully servicable condition,



    thank you

    bob.
    Last edited by bobjs; 09-10-2012 at 20:03.
    WARNING: LUPUS IS A KILLER, lets support them in the need to find out what it is, what causes it and how do we defeat it. Donating to LUPUS UK | LUPUS UK

    Living with Lupus - YouTube

  2. #2
    Bob have tried running .223 brass through your 20Tac FL die.

    Its works.....
    "If you can't see it, you can't shoot it"

  3. #3
    SD Regular bobjs's Avatar
    Join Date
    Sep 2009
    Location
    Tidworth/on here/or at Downton Abbey.
    Posts
    8,831
    Blog Entries
    5
    View my Gallery (39)View my Gallery (39)
    Quote Originally Posted by scotch_egg View Post
    Bob have tried running .223 brass through your 20Tac FL die.

    Its works.....
    Hi Bud... thank you for this

    I was going to do the following

    step 1, 223 fl die

    step 2, 20 tac body die

    step 3, 20 tac fl die.

    so SE all i need to do is fl the new brass and im done, or is there any trimming to do. ??

    i have 200 new 20 tac brass here but i wanted to try it as i think its the only rifle ill have left soon so i best be prepared just in case the flow of brass dries up etc.

    bob.
    WARNING: LUPUS IS A KILLER, lets support them in the need to find out what it is, what causes it and how do we defeat it. Donating to LUPUS UK | LUPUS UK

    Living with Lupus - YouTube

  4. #4
    Bob, I have loads of once fired 223 and 5.56. You can have 50 if you want for nothing. I'm interested in the Butler Creeks as I would like a set for my Schmidt and Bender 6x42. I think I need a 48mm and 41 mm for that and could use the 50mm for another scope.
    Last edited by Flanker; 06-10-2012 at 15:55.

  5. #5
    SD Regular bobjs's Avatar
    Join Date
    Sep 2009
    Location
    Tidworth/on here/or at Downton Abbey.
    Posts
    8,831
    Blog Entries
    5
    View my Gallery (39)View my Gallery (39)
    Quote Originally Posted by Flanker View Post
    Bob, I have loads of once fired 223 and 5.56. You can have 50 if you want for nothing. I'm interested in the Butler Creeks as I would like a set for my Schmidt and Bender 6x42. Not sure which ones fit though. I'll look into it
    Hi Flanker.

    that sounds good bud

    check what size you need and if these are any good to you bud ill post them down,

    bob.
    WARNING: LUPUS IS A KILLER, lets support them in the need to find out what it is, what causes it and how do we defeat it. Donating to LUPUS UK | LUPUS UK

    Living with Lupus - YouTube

  6. #6
    bob ive got a forming die coming gis a ring im sure we can sort something out

    same for anybody else once i get the forming die
    Official Sponsor to Team GB F Class

  7. #7
    Quote Originally Posted by bobjs View Post
    Hi Flanker.

    that sounds good bud

    check what size you need and if these are any good to you bud ill post them down,

    bob.
    PM sent. let me know how many you want I've got loads.

  8. #8
    Quote Originally Posted by scotch_egg View Post
    Bob have tried running .223 brass through your 20Tac FL die.

    Its works.....
    ur dead right i tried this when you posted about it a while back it worked a treat so no worries bout 20 brass drying up i have somthing called a bump die
    for my tac is this a forming die or is it a seperate thing altogether

  9. #9
    SD Regular bobjs's Avatar
    Join Date
    Sep 2009
    Location
    Tidworth/on here/or at Downton Abbey.
    Posts
    8,831
    Blog Entries
    5
    View my Gallery (39)View my Gallery (39)
    Quote Originally Posted by Flanker View Post
    PM sent. let me know how many you want I've got loads.

    Hi Bud

    pm back at you BC's in the mail in the morning

    kind regards

    bob.

    still looking for a 223 fl die. with all the bits mentioned above for swaps,
    WARNING: LUPUS IS A KILLER, lets support them in the need to find out what it is, what causes it and how do we defeat it. Donating to LUPUS UK | LUPUS UK

    Living with Lupus - YouTube

  10. #10
    SD Regular bobjs's Avatar
    Join Date
    Sep 2009
    Location
    Tidworth/on here/or at Downton Abbey.
    Posts
    8,831
    Blog Entries
    5
    View my Gallery (39)View my Gallery (39)
    Quote Originally Posted by d foxxer View Post
    ur dead right i tried this when you posted about it a while back it worked a treat so no worries bout 20 brass drying up i have somthing called a bump die
    for my tac is this a forming die or is it a seperate thing altogether
    Hi Dave

    the part number for the forming die is this

    redding 90660 and is 80 from midway uk,

    i don't have that kind of money just now as i am saving for a scope for the 308 so ill have to see how i get on with the 223 fl die 20 tac body die and then the fl die.

    bob.
    WARNING: LUPUS IS A KILLER, lets support them in the need to find out what it is, what causes it and how do we defeat it. Donating to LUPUS UK | LUPUS UK

    Living with Lupus - YouTube

Similar Threads

  1. *SOLD* Brass and Dies
    By twg1 in forum Reloading
    Replies: 11
    Last Post: 10-04-2012, 14:11
  2. Wanted : 9.3x64 Brenneke dies and brass
    By Karl in forum Ammunition, Reloading & Ballistics
    Replies: 0
    Last Post: 06-05-2011, 06:57
  3. Wanted .222 dies and .222 brass wanted
    By Eyefor in forum Reloading
    Replies: 7
    Last Post: 09-12-2010, 09:15
  4. For Sale 243 brass and dies
    By bobjs in forum Reloading
    Replies: 2
    Last Post: 06-12-2010, 23:35
  5. For Sale dies and brass,
    By bobjs in forum Reloading
    Replies: 27
    Last Post: 23-11-2010, 19:47

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •