Results 1 to 4 of 4

Thread: H335 for .243

  1. #1

    H335 for .243

    I have a few tubs of H335 left over from my .223 days, was hoping to use it up in the 243 but the only load data I have found so far is for a 58gr bullet, and I tend to use 75's, does anybody have any data for this combo I could use to start with, or quickload ? I know there's a few loads in 308 using this powder so I'd have thought it could be used for more than just 58gr pills.
    Cheers in advance
    Pete

  2. #2
    Bit fast for heavier bullets I would say. Have you tried reloaders nest online data. Might be something on there though

  3. #3
    just woundering it you have tried loading any .243 90/100g bullets. woundering was powder was best
    thanks
    simon

  4. #4
    Quote Originally Posted by The tramp View Post
    I have a few tubs of H335 left over from my .223 days, was hoping to use it up in the 243 but the only load data I have found so far is for a 58gr bullet, and I tend to use 75's, does anybody have any data for this combo I could use to start with, or quickload ? I know there's a few loads in 308 using this powder so I'd have thought it could be used for more than just 58gr pills.
    Cheers in advance
    Pete
    With 75 Grn Bullets

    Start = 34.0 grn .................................................. ............. max = 37.0 Grn of H335.

    With 85 grn Bullet

    Start = 34.5 Grn .................................................. .............. Max = 35.5 Grn

    With 100 Grn Bullet

    Start = 32.0 Grn .................................................. ................ Max = 34.0 grn.

    taken from Hodgdons #26 manual.

Similar Threads

  1. .243 V's .243 Ackley Improved
    By 2428 miles in forum Rifles & Calibres
    Replies: 120
    Last Post: 14-01-2013, 18:35
  2. 110 gr vmax with H335
    By big ears in forum Ammunition, Reloading & Ballistics
    Replies: 4
    Last Post: 08-12-2012, 18:43
  3. N550 .243/.243 Ack
    By N.F.W.M in forum Ammunition, Reloading & Ballistics
    Replies: 1
    Last Post: 26-08-2012, 19:45
  4. Replies: 0
    Last Post: 13-02-2012, 08:26
  5. IMR 4831 vs IMR 4350 for 243 and 7x65, and Norma 243 100 gn load
    By Heym SR20 in forum Ammunition, Reloading & Ballistics
    Replies: 4
    Last Post: 23-07-2010, 08:44

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •