Results 1 to 10 of 10

Thread: Moderator cover / sleeve

  1. #1

    Moderator cover / sleeve

    I'm looking for a cover / sleeve for my ASE UTRA compact Jet-Z moderator. There are pleanty advertised but all for the T8 / Wildcat size moderators but I can't find one designed for my mine.

    I suspect others must have encountered the same problem?

  2. #2
    SD Regular vizslamad's Avatar
    Join Date
    Mar 2009
    Location
    Shropshire. Land of rain and more rain.
    Posts
    714
    I had the same problem for my PES which is longer and narrower than the T8. I ended up buying some pipe lagging cutting it into sections length wise to fit the mod then covered with cammo tape. It worked out cheaper and I never have a frozen mod .
    John.

  3. #3
    I had a PES sleeve a friend gave me, it will fit a jet z compact. All you have to do is cut it to length or a bit longer and then stich the end you have cut to stop the stitching coming undone. Worked for me.

    Joanthon

  4. #4
    Bushwear do them for the PES.

  5. #5
    Just had the same issue! I bought a Discovery recently and if I had the boot open and leant in to get something while I had the rifle slung over my shoulder I'd crack the blinking mod off the boot. I bought one of these off eBay - really quick delivery and perfect fit for JetZ Compact - search for item 220368469081 It's not the thickest of neoprene but will hopefully stop me taking any more paint off car door or disturbing all deer within a half a mile!

  6. #6
    TAB make one - http://www.sportingservices.co.uk/tab.asp.

    Just 48 - Bargain!!

    Otherwise in that sound moderator test, Jackson was using one to disguise the northstar, so you could try phoning him.

  7. #7
    Quote Originally Posted by 75
    Just had the same issue! I bought a Discovery recently and if I had the boot open and leant in to get something while I had the rifle slung over my shoulder I'd crack the blinking mod off the boot. I bought one of these off eBay - really quick delivery and perfect fit for JetZ Compact - search for item 220368469081 It's not the thickest of neoprene but will hopefully stop me taking any more paint off car door or disturbing all deer within a half a mile!
    I bought one of those for my A-tec, bit of a tight squeeze, but just about works, it'd be fine for a thinner mod. I'm not expecting mine to last very long before the stitching tears apart!

  8. #8
    I should think one of these shotgun barrel covers would fit an ASE mod

    http://www.ronniesunshines.com/realt...ver-p-660.html


    Chris

  9. #9

    MOD PROTECTOR

    An rfd friend of mine used black shrink tube from a fishing tackle shop. Simply place over mod steam over a kettle untill tight. then trim ends a bit longer than the mod and steam again. Done correctly the shink tube will follow the contours of the mod stopping short of the entrance exit holes then leave to air dry
    Cheep to do and looks the buisness and if done correctly totally impervius to water.
    Incedently he removed the tube after sixteen months to check for wear/damage and the mod was in mint condition
    just an idea
    RICK O SHEA

  10. #10

    MOD PROTECTOR

    An rfd friend of mine used black shrink tube from a fishing tackle shop. Simply place over mod steam over a kettle untill tight. then trim ends a bit longer than the mod and steam again. Done correctly the shink tube will follow the contours of the mod stopping short of the entrance exit holes then leave to air dry
    Cheep to do and looks the buisness and if done correctly totally impervius to water.
    Incedently he removed the tube after sixteen months to check for wear/damage and the mod was in mint condition
    just an idea
    RICK O SHEA

Similar Threads

  1. carrying ammunition in a stock sleeve
    By ash243 in forum Equipment & Accessories
    Replies: 24
    Last Post: 01-03-2010, 23:02
  2. Northstar mod cover
    By liongeorge in forum Equipment & Accessories
    Replies: 3
    Last Post: 15-10-2009, 20:04
  3. Mod Cover
    By beno in forum Equipment & Accessories
    Replies: 4
    Last Post: 12-10-2009, 10:11
  4. neoprene moderator cover
    By mudman in forum Equipment & Accessories
    Replies: 17
    Last Post: 15-06-2009, 10:53
  5. looking for a scope cover / protector
    By david1976 in forum Deer Stalking General
    Replies: 9
    Last Post: 29-11-2008, 11:37

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •