Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Moderator

  1. #1


    Hi all,

    Can anyone tell me if there are any disadvantages (or out and out dangers ) to fitting a moderator rated for .30 calibres to a .243?

    Have the chance of a second hand PES, but it is for .30 calibres and I have a .243.



  2. #2
    Hi Novice
    All of my T8s are rated for 30cal, i use them on a .243 & .223 with no concerns. The last one came new with the .243 rifle as a combo so if the gun shop supplied it like that im sure there is no problem.

  3. #3
    I use a 30cal A-Tec on my 270 and 243. I also have a 30cal T8 on my 223 you will have not problems, it might be a tad louder but unless you shot them side by side with a cal' specific moderator I doubt you would tell the difference.

    Best rgds


  4. #4
    hi novice
    like what all others are saying you should not hav a problem
    the only thing i would worry about is :
    (a) where from and why it is for sale
    (b) was is specialy screw cut from a blank for a specific rifle as the thread may not match the one on your rifle
    (c)how much cheaper is it than having new as sound mods get shot out quicker than than the rifle as a rule
    not trying to put a downer on it but been down this road before
    a good deal is good if it works a bad one will cost more than a new one in the first place
    good luck in what you decide
    ps i use t8 a little front heavy but tames my 3006 a treat

  5. #5
    Thanks for the replies gents.

    I have been told that the noise reduction may not be as good as with a cal specific mod, but so long as it is an improvement on the un-modded report and recoil then I will be happy. I guess it gives me flexibility if I decide to change calibre in the future

  6. #6
    I buy my T8's from the guy who makes them in Finland. You should have no problems with a .30 cal T8 on 243. It is true to say that some folk dont like them, unbalances the rifle, looks ugly, they make a tinging noise. etc etc.

    But for me they are one of the best things since sliced bread, just about all my mates have one or two on their shooting irons, and when it comes to novice stalkers and taking them out, with very little recoil and a good solid rest it makes it easier. I also believe it keeps the deer more settled and the ground itself.

    Good luck.

  7. #7



    What about the implications of fitting one to a fluted barrel? Will this reduce the moderation, as some people have told me moderators need a seal on the barrel, and others say it is not important.

    Anyone use a ASE compact can-are they as quiet?

    Thanks and a happy new year to all.


  8. #8
    I have a T8 on a fluted barrel and there are no problems because the T8 has it's own sleeve so doesn't use the barrel for a seal.
    I hope thats of help.


  9. #9
    i have a t8 and a ase s5 no noise difference IMO.

  10. #10
    Quote Originally Posted by sikamalc
    they make a tinging noise. etc etc.
    Easily overcome - fit one of those neoprene covers - very effective and the 'ting' disappears.

Similar Threads

  1. New moderator
    By Brough in forum Equipment & Accessories
    Replies: 17
    Last Post: 01-10-2012, 12:26
  2. moderator
    By AndrewT059 in forum Deer Stalking General
    Replies: 15
    Last Post: 11-08-2010, 13:24
  3. New Moderator
    By JAYB in forum Deer Stalking General
    Replies: 5
    Last Post: 15-07-2008, 11:03
  4. Moderator
    By MJ75 in forum Deer Stalking General
    Replies: 15
    Last Post: 08-04-2008, 08:42
  5. Moderator
    By Pom in forum Equipment & Accessories
    Replies: 28
    Last Post: 26-09-2007, 20:40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts