Results 1 to 7 of 7

Thread: rings and bases to fit bruno

  1. #1

    rings and bases to fit bruno

    looking for set of rings to fit my JSR 6x24x44 scope the optic is 25.4 mm in diameter for the rings its to fit onto my bruno .22hornet bolt action ive tried an alloy set and there rubbish so looking for a steel set please i have a set of Hilver steel fullbore rings and bases if someone wants to swap if not then i will pay for them preferably cheap cheers robert
    LIVE AND LET LIVE! THERES ALWAYS ANOTHER DAY!

  2. #2
    Do it properly, with style and mindful that objective clearance is not the only consideration as Brno have a higher than helpful bolt lift. Oh, and do it once:

    a. Conetrol DapTar Bases
    b. Conetrol 1" Projectionles Rings

    Projectionless Scope Mount Stainless Steel Rifle Scope Mounts Rings

    K

  3. #3
    surely someone has a set they can sell me ? :-(
    LIVE AND LET LIVE! THERES ALWAYS ANOTHER DAY!

  4. #4
    You don't need bases, you just need rings to fit the Brno/CZ dovetail.
    Opticwarehouse keep the Warne ones, depending on the scope ocular bell size you may get away with medium
    height rings, but it will be very close if it clears at all, better to go with the high ones, standard CZ rings are .540"
    from dovetail to tube.

    Neil.

  5. #5
    Quote Originally Posted by Klenchblaize View Post
    Do it properly, with style and mindful that objective clearance is not the only consideration as Brno have a higher than helpful bolt lift. Oh, and do it once:

    a. Conetrol DapTar Bases
    b. Conetrol 1" Projectionles Rings

    Projectionless Scope Mount Stainless Steel Rifle Scope Mounts Rings

    K
    You keep recomending these, and I agree they look very nice, but who sells them in the UK
    and who knows exactly which rings you need for any given rifle, I tried a few years ago to get some
    for a rifle, never did find which bits I needed or who sells them, at that time the manufacturer didn't
    seem to care and would not post them to the UK.

    Neil.

  6. #6
    Same as for the 527
    warne HIGH Perm or QD and get the the bolt handle shaved if your occular is OVER 42mm or
    if your a railer, low rings &
    Scope Rail, 16mm Dovetail, OAL 5-1/2, Aluminum, Factory Original, New Gun Parts | 1291040 | Numrich Gun Parts
    or
    Other Mounts and Rails - - CZ - Model 527 16mm/Picatinny Rail Adapter
    and a blackhawk cheekpeice if required. Job done.

  7. #7
    Quote Originally Posted by Hornet 6 View Post
    You keep recomending these, and I agree they look very nice, but who sells them in the UK
    and who knows exactly which rings you need for any given rifle, I tried a few years ago to get some
    for a rifle, never did find which bits I needed or who sells them, at that time the manufacturer didn't
    seem to care and would not post them to the UK.

    Neil.
    you'll need to order them straight from texas I believe. Morris from alaska arms can also recommend a set to fit your rifle and specific scope.

    I think talley do a set too, but not 100% sure.

    I use warne myself, and they do fine, but they are hideously ugly

Similar Threads

  1. Replies: 2
    Last Post: 25-11-2012, 17:03
  2. Replies: 0
    Last Post: 25-11-2012, 15:12
  3. howa scope bases (any other makes fit them?)
    By bewsher500 in forum Equipment & Accessories
    Replies: 5
    Last Post: 15-10-2012, 22:49
  4. Replies: 3
    Last Post: 28-09-2012, 13:40
  5. the best 1" rings for a cz/bruno rimmy (.17 hmr)
    By Offroad Gary in forum Equipment & Accessories
    Replies: 2
    Last Post: 20-01-2011, 13:17

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •