Results 1 to 3 of 3

Thread: .25-06Rem. Headspace measurement?

  1. #1

    .25-06Rem. Headspace measurement?

    If anyone out there has the headspace measurement, or can measure the headspace dimension on a standard unfired .25-06 factory round, any manufacturer, but please state make, I'd very much appreciate if they will post it here or PM me the dimension they measure.
    Hopefully thanks in advance. Cheers, ATB
    Blaser K95 Luxus Kipplaufbüchse .25-06Rem. Zeiss 8x56, 110gn Nosler Accubond = Game Over!

  2. #2
    SAAMI him say:-

    Oops - got it wrong (was looking at the wrong sheet) - I'll get the right values in a minute

    Here you go:-

    Bullet Headspace length 2.0526" -0.007" (52.136mm -0.178mm) at reference diameter on shoulder 0.375" (9.53mm)

    Chamber Headspace length 2.0587" -.010" (52.291mm -0.254mm) at reference diameter on shoulder 0.375" (9.53mm)

    ​Ian
    Last edited by Yorric; 13-05-2013 at 09:07. Reason: Wrong info - sorry - put right now

  3. #3
    Right Ian, got that. Thanks George.
    Blaser K95 Luxus Kipplaufbüchse .25-06Rem. Zeiss 8x56, 110gn Nosler Accubond = Game Over!

Similar Threads

  1. Nosler 110gn Accubond for .25-06Rem.
    By deeangeo in forum Ammunition, Reloading & Ballistics
    Replies: 1
    Last Post: 14-06-2012, 20:48
  2. Headspace
    By timbrayford in forum Ammunition, Reloading & Ballistics
    Replies: 4
    Last Post: 11-11-2011, 19:56
  3. Roe head measurement
    By Frank Homes in forum Deer Stalking General
    Replies: 5
    Last Post: 15-09-2011, 20:16
  4. Trophy measurement
    By logburner in forum Taxidermy & Trophy Preparation
    Replies: 3
    Last Post: 19-07-2011, 10:25
  5. Sako 75 Stock Measurement
    By Dom in forum Rifles & Calibres
    Replies: 4
    Last Post: 03-02-2011, 21:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •