Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Load for 25-06

  1. #1

    Load for 25-06

    Hi I am buying a 25-06, has anybody got any good load data for this calibre cheers

  2. #2
    Remy case,fed match gold primer,46.5grs of varget,85gr nos bal tip about 40 fow off rifling,enjoy

  3. #3
    50 grains of IMR 4350 (or IMR 4831) behind a 115gr Combined Technology or Nostler BT.

  4. #4

  5. #5
    cheers again will give them a go will post

  6. #6
    Try 110grn accu bonds and imr 4831. Its a good bullet and powder for the 25-06. Another combo I liked was h4831 and 117grn hornady interlocks. Both load can be seen on hornadys and noslers websites.


  7. #7
    cheers again cant wait to start

  8. #8
    Most .25-06 rifles are 1-10 twist and work best with bullets at around 100gns or less. They will of course work with a heavier bullet but most likely not quite so well.
    I use IMR4350 x 53gns with a 100gn Sierra bullet & Rem 91/2 primer. It's a 'hot' load but produces pretty tight groups at 100yds and deer fall over promptly on impact!
    Another 'Hot' load I use is IMR4831 x 53gns with 110gn Nosler AB bullet & CCI200 primer. Both loads work well in my rifle.

    Use the usual caution & work up your own loads. ATB
    Blaser K95 Luxus Kipplaufbüchse .25-06Rem. Zeiss 8x56, 110gn Nosler Accubond = Game Over!

  9. #9

  10. #10
    cheers for that .it has a 1-10 twist, I take it been a hot load it will also be pretty flat.

Similar Threads

  1. 25-06 Larger deer load.
    By RichardP in forum Ammunition, Reloading & Ballistics
    Replies: 12
    Last Post: 17-07-2017, 21:31
  2. 25-06 Deer Load
    By Brian243 in forum Ammunition, Reloading & Ballistics
    Replies: 5
    Last Post: 21-11-2011, 08:05
  3. 25.06 'Quick Load' Question ?
    By Bill Wapiti in forum Ammunition, Reloading & Ballistics
    Replies: 3
    Last Post: 11-10-2011, 17:26
  4. 85gn ballistic tips in 25-06 - any load data?
    By Offroad Gary in forum Ammunition, Reloading & Ballistics
    Replies: 2
    Last Post: 18-11-2010, 19:30

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts