Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Riflecraft TSR 1 .308 win + Leupold Mk 4 + Moderator + Cleaning / loading bits.

  1. #1

    Riflecraft TSR 1 .308 win + Leupold Mk 4 + Moderator + Cleaning / loading bits.

    I think it is time for a rationalisation of the rifle safe so my old faithful setup is up for sale.......

    The rifle is a Riflecraft TSR 1 in .308 Win. It is based on a Remington PSS. Barrel is the 1:12 twist factory cut back to 20" and re-crowned. A Timney trigger is fitted and the whole lot is in an HS precision stock that I have re-finished in a textured green. There is a muzzle brake, thread cover and T8 magnum moderator allavailable with the rifle.

    On top is a Leupold Mk 4 Tactical 3.5 - 10 x 40 scope with illuminated mil-dot reticule. That is sitting in Third Eye Tactical piccatinny mounts on a 20 MOA Third Eye Tactical Rail.

    The rifle shoots into an inch at worst and much less with some loads. I have loads for it with everything from 110 gn to 165gn bullets. I will write all those down for the buyer.
    Click image for larger version. 

Name:	2013-12-15 16.58.29.jpg 
Views:	854 
Size:	412.6 KB 
ID:	35727Click image for larger version. 

Name:	2013-12-15 16.59.10.jpg 
Views:	522 
Size:	414.6 KB 
ID:	35728Click image for larger version. 

Name:	2013-12-15 16.59.47.jpg 
Views:	558 
Size:	377.1 KB 
ID:	35729Click image for larger version. 

Name:	2013-12-15 17.01.47.jpg 
Views:	465 
Size:	389.8 KB 
ID:	35732Click image for larger version. 

Name:	2013-12-15 17.02.46.jpg 
Views:	399 
Size:	430.7 KB 
ID:	35733Click image for larger version. 

Name:	2013-05-01 12.32.30.jpg 
Views:	394 
Size:	457.2 KB 
ID:	35734Click image for larger version. 

Name:	2013-04-20 07.38.37.jpg 
Views:	397 
Size:	760.7 KB 
ID:	35735Click image for larger version. 

Name:	2013-12-15 17.00.31.jpg 
Views:	322 
Size:	359.5 KB 
ID:	35731


    I have a few bits of cleaning gear including brushes, bore guide, jags,patches etc., that can go with.

    There are bags of Lapua and Norma cases that can go with as well. All those will be fire formed, some have been fired 2 or 3 times, others up to 10 times but all marked up in batches. There are about 200 fully prepped and ready to load.

    Whatever few bullets and loaded rounds I have left can go as well provided buyer has a suitably conditioned FAC.

    The rifle has been stalked with and dragged through the mud from one endof country to the other and has got the honourable battle scars to prove it butstill more than serviceable and reliable. Barrel has been regularly & properly cleaned.

    I'm looking for
    1,250 for the lot but. Also open to offers for the parts but it makes a great set-up.

    Bi-pod in the photos not included. Sale would need to be face to face please. Located near Stansted, Essex.




    Attached Thumbnails Attached Thumbnails 2013-12-15 16.59.57.jpg  
    Last edited by Wingers243; 22-12-2013 at 22:20.

  2. #2

  3. #3
    Christ that's a big mod! A lot of kit for the money!

    Best of luck in the sale!

    I used to live in Stansted where about are you?

    Atb Matt

  4. #4
    Click image for larger version. 

Name:	2013-04-09 18.52.19.jpg 
Views:	189 
Size:	190.0 KB 
ID:	35790Certainly is Matt. T8 Magnum, built to tame the mighty .300 Win Mag. Makes the .308 sound like an airgun!

    Currently up near the Old Bell Pub, I expect you will know it.

    Anyone interested, here is a 200 metre, 10 shot group from a few months ago shot in a howling cross wind.

  5. #5
    yeah I know the pub best of luck with the sale, do you shoot locally and whats your name.

    Atb Matt

  6. #6
    This one is here to go. Make me a sensible offer on the lot if you wish.

  7. #7

  8. #8
    Can arrange RFD to RFD if necessary for this one. RFD cost up to 50 included in the price at my end.

  9. #9
    Make me an offer on the whole kit if you like.

    If you want the parts:

    Rifle, Moderator, brass, bullets etc, Inc. 20 MOA Rail & Piccatinny 30mm rings 600

    Scope 650

  10. #10
    Hey how much for the scope rings and rail?

Similar Threads

  1. For Sale loading bits
    By borden in forum Reloading
    Replies: 1
    Last Post: 01-07-2013, 21:23
  2. leupold mk 4
    By triggersqueezer in forum Equipment & Accessories
    Replies: 0
    Last Post: 31-05-2012, 10:31
  3. Riflecraft's New Hardy Gen III Moderator
    By AnthonyR in forum Equipment & Accessories
    Replies: 16
    Last Post: 07-03-2012, 18:43
  4. Wanted some loading bits wanted,
    By bobjs in forum Deer Stalking Equipment
    Replies: 3
    Last Post: 08-12-2011, 15:47
  5. loading bits to clear
    By bobjs in forum Deer Stalking Equipment
    Replies: 2
    Last Post: 23-11-2009, 18:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •