Results 1 to 1 of 1

Thread: Lyman 357446 and 358212 Moulds

  1. #1
    SD Regular
    Join Date
    Dec 2008
    Location
    East Midlands M1/M69 Junction 21
    Posts
    5,397

    Lyman 357446 and 358212 Moulds

    These are surplus to my needs and are both single cavity. Would suit a 38/357 or heavy bulleted 9mm Parabellum held for humane dispatch or a pistol calibre carbine or a long barrel revolver held on FAC or maybe even a rook n'rabbit rifle held on an FAC?

    Lyman 357446 is listed by Lyman as 165 grain weight in their No2 alloy and top punch number #429 with sizing die of .357" or .358" diameter.

    Lyman 358212 is listed as 145 grain weight in their No2 alloy and with a top punch number #311 and with sizing die or .357" or .358" diameter.

    Cost is 15.95 EACH including Recorded Delivery within Great Britain and Northern Ireland ONLY. Not available to Channel Islands.

    Payment by a cheque, Postal Order or BACS. I do not accept Paypal.

    I will sell the two at 30.00 for the two including Recorded Delivery as before and with exclusions as noted.

    Attachment 38010

    ABOVE PICTURE IS 357446 a SWC TYPE

    BELOW IS 358212 a ROUND NOSE TYPE

    Attachment 38011

    Pictures are of each mould shown opened out. There is ONE mold of SINGLE CAVITY (so the left and right block complete as shown) for "each" 15.95 not two moulds!
    Last edited by enfieldspares; 12-02-2014 at 22:08.

Similar Threads

  1. *SOLD* 12 bore and .410 slug moulds
    By EMcC in forum Reloading
    Replies: 2
    Last Post: 17-01-2014, 22:57
  2. Wanted 30-30 brass and .30 cal bullet moulds wanted**************
    By roedeerbuck123 in forum Reloading
    Replies: 0
    Last Post: 27-05-2013, 17:34
  3. RCBS of LYMAN
    By leec6.5 in forum Ammunition, Reloading & Ballistics
    Replies: 1
    Last Post: 06-10-2011, 12:04

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •