Results 1 to 7 of 7

Thread: Scope Mounts For A Parker Hale

  1. #1

    Scope Mounts For A Parker Hale

    Hi All,

    I need some high ish 1" scope mounts for my Parker Hale .270. I've been looking for some RAHS3s but am struggling, does anyone know of anything else that will do?

    It's got Parker Hale bases on it and I don't really want to change them as sooner or later I'll find some RAH3s. I've seen some Sportsmatch rings on the net (model TO50C) that say they are suitable for Parker Hale bases but I reckon my bases are 19mm across the flat where as these say they are suitable for 17mm bases.

    Any help greatly appreciated,

    Jim

  2. #2
    I think I have a new set somewhere - I'll look later when I'm home .

    Correction - I have a used set RAHS3 in my hand if you need them.
    Last edited by waterford103; 27-06-2014 at 18:06.
    "This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!"
    Adolph Hitler 1933

  3. #3
    Quote Originally Posted by Jim xyz View Post
    Hi All,

    I need some high ish 1" scope mounts for my Parker Hale .270. I've been looking for some RAHS3s but am struggling, does anyone know of anything else that will do?

    It's got Parker Hale bases on it and I don't really want to change them as sooner or later I'll find some RAH3s. I've seen some Sportsmatch rings on the net (model TO50C) that say they are suitable for Parker Hale bases but I reckon my bases are 19mm across the flat where as these say they are suitable for 17mm bases.

    Any help greatly appreciated,

    Jim
    It depends on where they measure the bases. Some measure across the top whilst other measure the bottom of the angle.

    In the mean time Lynx/B-Square who took up the old Hilver line of mounts do make them to fit the earlier BSA's which of course were machined to use Parker-Hale rings. I have three sets but they are all for 26 mm scope tubes. Only have one set of RAHS.3 rings left and as you say they are getting harder to find now in good condition.

    Another option would be to swap the bases for soem Weaver ones. They do I believe a steel line of them. not sure if they list the -h rifles but it would be surprising if they didn't as after all they are a Mauser 98 receiver/action and the Mauser 98 is still very popular in the US.

  4. #4
    I had a similar problem on my BSA Monarch, it had Parker Hale Bases and I could not find rings to suit.
    Replaced the Bases with steel weaver bases from Optics Warehouse. Then used some Sports match Rings.

  5. #5
    Hi Guys,

    As always SD proves how great it is.

    Waterford, you are a Gent and I've sent you a PM.

    Brithunter, as always you are the font of knowledge for all things Parker Hale.

    Many thanks,

    Jim

  6. #6
    Quote Originally Posted by Jim xyz View Post
    Hi Guys,

    As always SD proves how great it is.

    Waterford, you are a Gent and I've sent you a PM.

    Brithunter, as always you are the font of knowledge for all things Parker Hale.

    Many thanks,

    Jim
    Your welcome, but I am still learning about Parker-Hale and it's products.

  7. #7
    Parker-Hales are very under-rated rifles , I still have one - a P-H M82 7.62 sniper rifle , it's always spot on accurate and reliable.
    "This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!"
    Adolph Hitler 1933

Similar Threads

  1. Wanted Parker Hale RAHS3 Scope Mounts
    By Jim xyz in forum Optics
    Replies: 0
    Last Post: 22-06-2014, 15:30
  2. *SOLD* Parker-Hale roll-off scope mounts RAHS 3 - High 1 inch
    By jcampbellsmith in forum Optics
    Replies: 2
    Last Post: 09-04-2014, 16:22
  3. For Sale 6X32 Nikko Sterling scope with Parker Hale RALS3 mounts.
    By stag1933 in forum Optics
    Replies: 1
    Last Post: 15-06-2012, 17:37
  4. Alternatives for Parker-Hale Roll-Off Scope Mounts
    By Uncle Norm in forum Equipment & Accessories
    Replies: 10
    Last Post: 15-12-2011, 17:06
  5. Wanted Parker Hale scope mounts
    By charliemac in forum Rifles & Calibres
    Replies: 10
    Last Post: 12-05-2011, 22:14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •