Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: sako stock

  1. #1

    sako stock

    A question for the Sako experts on here ! I have a sako iv , it is a 25 06 cal , I am after an after market stock for it , preferably a GRS , but whatever really , I take it my rifle is not a 75 iv as it doesn't state 75iv , just sako iv , do you no what will fit it or any recomendations , had a 500 pound budget , thanks in advance , Arron.ps would like a; adjustable cheek piece , b; thumb hole or similar.
    Last edited by arron; 29-08-2014 at 12:13.

  2. #2
    I went on this quest for a lightweight sporter stock for my Sako 75 Finnlight .243. I gave up the idea in the end as there was little on offer for the Sako 75 action. Tactical etc. looked like a different matter though. You can get something made to fit by hand fitting but that gets rather expensive. I hope you have a better result than I. I don't think it will make much difference which IV length action it is though, as far as choice and availability is concerned.

  3. #3
    cheers Norm , having spoke to a few major dealers i am not to optimistic , i dont even no what model i am to look for ! , thanks again ,arron.

  4. #4
    Does the side of the action have IV or AIV on it? I know that Bell and Carlson do long action stocks for some older Sakos...

  5. #5
    Might be a bit over budget but Mcmillan do a stock for that action -downside is the 6 month wait.

  6. #6
    I have a B + C stock for my Sako II action very nice..C.

  7. #7
    Quote Originally Posted by 20-250 View Post
    Does the side of the action have IV or AIV on it? I know that Bell and Carlson do long action stocks for some older Sakos...
    it just says SAKO IV , thanks for the input guys ! i will get there in the end.

  8. #8
    Distinguished Member Ronin's Avatar
    Join Date
    Oct 2014
    Location
    Lancs / Cumbria Border
    Posts
    1,805
    Think your 25-06 from memory is the precursor to the 75 with metal shroud and bottom metal with detach magazine?


    3 lug bolt?


    If so a long action 75 inlet "may" fit - simplest thing to do is ask if anyone here or you know has a 75 in 30-06 / 25-06 and see if that stock fits your action..


    I haven't one here otherwise you'd be welcome to look - perhaps Malmo has one in??

  9. #9
    Aye its the 3 lug bolt and detachable mag and shroud , that sounds like the thing to do as you say Andy , i will do a bit of ringing about tomorow to see if i can find a 75 , cheers again ,Arron.

  10. #10
    Quote Originally Posted by arron View Post
    A question for the Sako experts on here ! I have a sako iv , it is a 25 06 cal , I am after an after market stock for it , preferably a GRS , but whatever really , I take it my rifle is not a 75 iv as it doesn't state 75iv , just sako iv , do you no what will fit it or any recomendations , had a 500 pound budget , thanks in advance , Arron.ps would like a; adjustable cheek piece , b; thumb hole or similar.
    Arron,

    I had a Sako 85 and only when I got a GRS from Jackson rifles did we discover that the recoil lug can be different from original manufacturer stock to stock and year to year. There is no defined "regularity".

    Jackson sorted the fit out.

    Stan

Similar Threads

  1. Wanted Sako Trg green stock sides or stock and trg bipod
    By bob_mullis in forum Firearms Components
    Replies: 0
    Last Post: 06-04-2014, 05:46
  2. Wanted Mcmillan Sako Hunter stock for Sako 75 IV 270
    By crouch valley in forum Firearms Components
    Replies: 4
    Last Post: 13-03-2014, 20:51
  3. Wanted sako stock
    By jb7x57 in forum Firearms Components
    Replies: 4
    Last Post: 02-02-2014, 18:32
  4. Replies: 1
    Last Post: 30-05-2011, 11:23
  5. sako stock
    By fly tyer in forum Deer Stalking General
    Replies: 7
    Last Post: 31-01-2010, 18:34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •