Results 1 to 10 of 10

Thread: Burris Eliminator 3

  1. #1

    Burris Eliminator 3

    brand new Burris Eliminator 3.

    Not been fitted to a rifle, new in box.

    pictures to follow.

    RRP 1300, offers in region of 1000 please.
    Last edited by Tam the Gun; 10-12-2014 at 22:12.

  2. #2


    Photos below

  3. #3
    May consider a swap, for a rifle set up or quality glass.
    Last edited by Tam the Gun; 14-12-2014 at 18:59.

  4. #4
    How about a .257 Weatherby Magnum pillar bedded into a McMillan stock

  5. #5
    Thank you for the offer, the .257 Wby Mag would be too much of a venture for me at the minute.

  6. #6
    Some useful info on this scope.

    The New Eliminator III with X56 reticle technology empowers the rifleman with even more accuracy, more range, and a method of windage compensation that is now perfected AT ANY MAGNIFICATION. With the Eliminator III, you can accurately range and hit targets out to 1,200+ yards due to its enhanced ballistic programming that incorporates both the Drop Number and Ballistic Coefficient of the cartridge and load you are shooting. Combined with the new X96 reticle that offers a convenient and accurate method for determining hold-off for wind at longer ranges, the Eliminator III delivers extreme accuracy at extreme ranges.


    1200+ Yards
    Accurate at ANY Magnification
    New Ergonomic Activation Buttons
    Enhanced Extreme Range Ballistic Programming
    Sleek, New Design
    Parallax Adjustment 50 yd. to Infinity
    Suitable for centrefire rifles only
    Simple Operation & Programming
    At the press of a button, you enter the Drop Number and Ballistic Coefficient appropriate for your ammunition. This data is available in the Cartridge List (1,500+ Specific Loads) provided by Burris or from just about any ballistics software program.

    Range Compensation
    To range, place the cross hair on your target and press either button on the objective bell. In less than a second, the range to your target and a lighted dot will appear indicating the correct aiming point for your specific ammunition for the distance to the target.

    Windage Compensation Innovation
    The X56 reticle provides a convenient and accurate METHOD to more easily compensate for wind. However, complete wind compensation is NOT fully automated within the scope. It still requires some thinking on the part of the shooter. In addition to distance, the digital display will show a 10 MPH Wind Value for your specific cartridge at the indicated range to your target. This is a “Dot Value” that corresponds to the dots on each side of the reticle’s vertical post. These dots let the shooter precisely hold into the wind. The shooter still needs to estimate the cross-wind and convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind using the appropriate “Dot Value”.

    Strong, Low Mounting
    The unique mounting system allows the lowest possible mounting of the LaserScope to the rifle.

  7. #7
    Easy to use and simple to set up.

    Plenty of useful videos on this scope on YouTube.

  8. #8
    Hi, could be interested. Tam, could you please PM me ?
    (I'm a new member so I can't post PMs yet - hope I can answer them).

  9. #9

    you will need to make an introduction as per the site rules, it allows everyone to know your interests etc.

    PM sent

  10. #10
    Sold pending funds

Similar Threads

  1. Wanted Burris eliminator mk 2
    By exmarksman9870 in forum Optics
    Replies: 3
    Last Post: 12-09-2014, 08:27
  2. *SOLD* Burris Eliminator laser scope
    By solo gun in forum Optics
    Replies: 12
    Last Post: 28-02-2014, 11:47
  3. burris eliminator iii
    By DEAN.G in forum Equipment & Accessories
    Replies: 7
    Last Post: 15-05-2013, 20:17
  4. For Sale Burris Eliminator
    By shootingduckdog in forum Optics
    Replies: 0
    Last Post: 28-06-2012, 20:22
  5. Burris Eliminator
    By WiltsPat in forum Equipment & Accessories
    Replies: 6
    Last Post: 11-01-2011, 16:13

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts