Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: QD Mounts on a Brno Model 2

  1. #1

    QD Mounts on a Brno Model 2

    Hello all,

    Ive got quite an old Brno Model-2-EH. Id like mount the scope in a good QD system so I can also use the iron sites on the range. Has anyone done this before? If so, what do you use?

    KR,

    Scrummy

  2. #2
    I have owned 1947s ( 21 and 22), 602 and CZ 550, but not familiar with the bases on the Model 2. Is it like the 550, with a recoil lug notch? If so, the Warne QD and permanent rings will fit.

  3. #3
    Quote Originally Posted by Southern View Post
    I have owned 1947s ( 21 and 22), 602 and CZ 550, but not familiar with the bases on the Model 2. Is it like the 550, with a recoil lug notch? If so, the Warne QD and permanent rings will fit.
    Nope, afraid not. It's a .22lr.

    KR,

    Scrummy

  4. #4
    Then it should use the 11mm rail. Warne and Talley made QD rings for that, too, because it is a standard for target rifles, like Anschutz.

  5. #5
    Quote Originally Posted by Southern View Post
    Then it should use the 11mm rail. Warne and Talley made QD rings for that, too, because it is a standard for target rifles, like Anschutz.
    Dumb question but how do you measure a dovetail?

  6. #6
    Widest point to point across its width. Search web for some photos of 11mm dovetails and rails on air rifles and .22 target rifles, and you will see lots of them, and sights, scope mounts, ringmounts, etc

  7. #7
    my 1982 mod 2 is 11mm dovetails, i think most are

  8. #8
    Be a little careful BRNO mod 2s had a few different rail sizes throughout the years lots where 11mm though.

  9. #9
    I think they were 16mm up until the mid to late 1970's. The year of manufacture is on the side of the action, your 2E will be later and 11mm. If you are really dead set on QD mounts, you might consider using an 11mm to weaver type adapter rail or blocks, which will open up a lot more inexpensive options for you.
    Last edited by lincolnjefferies; 10-01-2015 at 16:32.

  10. #10
    If it's an old one it will be 14mm across the top of the dovetail, if it is I have a set listed in the classifieds for a CZ527 which is the same size.

    Neil.

Similar Threads

  1. *SOLD* Warne QD for CZ or Brno
    By Hornet 6 in forum Optics
    Replies: 4
    Last Post: 27-01-2015, 12:49
  2. *SOLD* .222 Brno Fox model 2
    By multiman in forum Firearms
    Replies: 2
    Last Post: 02-03-2014, 19:04
  3. Wanted Brno model 2 extra high mounts
    By Bigboab29 in forum Optics
    Replies: 2
    Last Post: 17-07-2013, 10:39
  4. Wanted CZ/BRNO QD mounts/rings
    By PKL in forum Firearms Components
    Replies: 0
    Last Post: 25-01-2013, 11:36
  5. For Sale BRNO/CZ QD bases and rings.
    By LJT in forum Deer Stalking Equipment
    Replies: 1
    Last Post: 23-08-2010, 12:17

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •