Results 1 to 6 of 6

Thread: New, in the white, parker hale. Ph. Mauser fit 22-250 barrel

  1. #1

    New, in the white, parker hale. Ph. Mauser fit 22-250 barrel

    NEW, IN THE WHITE, PARKER HALE. PH. MAUSER FIT 22-250 BARREL

    Threaded and chambered and still in the makers grease – which I have cleaned out of the bore and it is MINT – the final cleaning patch slid through like silk!

    No sight dovetails or screw holes.

    Your chance to get one of the few still around.

    The thread depth is one inch so there is enough meat in it to re-thread for a Sako, Tikka or similar.

    Shown against my Parker Hale .270 for comparison.

    Currently held with an RFD and you’ll need one to receive it, or collect it from Mansfield with a slot on your ticket.

    100
    Last edited by coire257; 23-02-2015 at 08:36.

  2. #2
    Following a comment from a friend - it's grease on the barrel not rust!!

    Where are all you Parker Hale enthusiasts??

  3. #3
    Hi There,

    Is this a varmint barrel? and what length is it?

    And for anyone that has knowledge of these things, I've got a P.H. 22.250 1200 Varmint, would a gunsmith be able to easily replace the the existing barrel with this on? And what sort of cost would it be to get this one blued and fitted? I only paid a few hundred for the rifle.

    Cheers,

    Jim

  4. #4
    Hi Jim,

    It's 23 1/2" actually 60cm. As the photo shows it is the standard taper sporter weight.

    It's an easy fit. Unscrew the old one, screw on the new one, check the head-space, take to proof house for re-proofing, remove and send for blacking, re-fit and zero. Somewhere in there you might want to thread it for a moderator, or I could get that done for you.

    Total cost 150 - 200

    Best,

    M

  5. #5
    Cheers Coire,

    I'll give it some thought.

    Jim

  6. #6
    Quote Originally Posted by Jim xyz View Post
    Cheers Coire,

    I'll give it some thought.

    Jim
    Bump

Similar Threads

  1. Wanted Mauser / parker hale, ph, magazine follower spring.
    By coire257 in forum Firearms Components
    Replies: 2
    Last Post: 19-07-2014, 09:19
  2. Wanted Parker Hale Sight Blocks/Bases for PH 1200 TX
    By Toxster in forum Firearms Components
    Replies: 2
    Last Post: 31-03-2014, 10:55
  3. Replies: 2
    Last Post: 15-05-2011, 14:40
  4. Wanted 30mm mounts to fit a 19mm dovetail (parker hale)
    By mosa in forum Firearms
    Replies: 3
    Last Post: 15-05-2011, 11:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •